Excellent PLC
Product Introduction
The Epro PR6424/001-030 Eddy-Current Sensor is a high-precision non-contact displacement sensor designed for monitoring shaft vibration, eccentricity, and axial position in rotating machinery. With its 8 mm sensor head, it provides accurate measurements of dynamic and static shaft movements, making it highly suitable for turbine, compressor, motor, and pump monitoring systems.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PR6424/001-030 |
| Sensor Type | Eddy-Current Displacement Sensor |
| Sensor Head Diameter | 16mm |
| Weight | 0.2 kg |
| Measurement Range | Typically up to 2 mm (depending on system configuration) |
| Frequency Range | DC to 20 kHz |
| Sensitivity | 7.87 mV/µm (±3%) |
| Linear Range | ±0.5 mm to ±1 mm |
| Operating Temperature | -35 °C to +180 °C |
| Output Signal | Compatible with CON041 Proximity Transducer systems |
| Cable Length | Standard 3 m (other lengths available on request) |
| Housing Material | Stainless steel |
| Mounting Thread | M10 x 1 |
Product Applications
-
Shaft vibration monitoring in turbines, compressors, and large motors.
-
Axial displacement detection in rotating machinery.
-
Eccentricity monitoring of rotor shafts.
-
Condition monitoring systems for predictive maintenance.
-
Industrial environments where high accuracy and robust sensing technology are required.
-
Integration into Epro and Bently Nevada monitoring systems.
Product Advantages
-
High Accuracy: Provides reliable and precise displacement and vibration measurements.
-
Non-Contact Measurement: Prevents wear and allows continuous monitoring without interrupting machine operation.
-
Wide Temperature Range: Operates reliably in demanding industrial conditions.
-
Rugged Construction: Stainless steel housing ensures durability in harsh environments.
-
System Compatibility: Fully compatible with Epro CON041 and other transducer drivers.
-
Flexible Installation: Different cable lengths and configurations available for custom requirements.
FAQ
Q1: What type of signal does the PR6424/001-030 output?
A1: It provides a voltage output proportional to shaft displacement, designed for use with Epro CON041 transducer systems.
Q2: Can this sensor handle high-frequency vibration monitoring?
A2: Yes, it supports a frequency response up to 20 kHz, making it suitable for both low- and high-frequency vibration detection.
Q3: Is the sensor affected by oil or industrial contaminants?
A3: No, the non-contact eddy-current principle ensures accurate operation even in oily or contaminated environments.
Q4: What is the typical sensitivity of this sensor?
A4: The standard sensitivity is 7.87 mV/µm with a tolerance of ±3%.
Q5: Which monitoring systems are compatible with this sensor?
A5: It is fully compatible with Epro CON041 and can be integrated into Bently Nevada monitoring platforms.
Q6: Can it measure both dynamic and static shaft movements?
A6: Yes, it is capable of detecting dynamic vibration as well as static shaft displacement.
Q7: How is linearity ensured in this sensor?
A7: The sensor is designed with precise calibration to maintain linear output across its measurement range.
Q8: What is the maximum cable length available?
A8: Standard is 3 m, but longer lengths can be supplied depending on installation needs.
Q9: Does the sensor require calibration before installation?
A9: No, it is factory-calibrated and ready for integration, but system verification is recommended during commissioning.
Q10: Can this sensor operate in high-temperature zones near turbines?
A10: Yes, it is rated up to +180 °C, allowing use in high-temperature industrial environments.
Related Models
| Model Number | Description |
|---|---|
| PR6423/002-030 | Eddy-Current Sensor, 5 mm tip |
| PR6424/002-031 | Eddy-Current Sensor, 8 mm, extended cable |
| PR6426/003-030 | Eddy-Current Sensor, 11 mm tip |
| PR6422/002-010 | Eddy-Current Sensor, 5 mm, short version |
| PR6424/006-030 | Eddy-Current Sensor, 8 mm, high-temp |
| PR6425/002-030 | Eddy-Current Sensor, 25 mm extended range |
Popular Models from the Same Brand
| Model Number | Description |
|---|---|
| PR6422/010-000 | Eddy-Current Sensor, standard 5 mm version |
| PR6423/005-030 | Eddy-Current Sensor, 5 mm with long cable |
| PR6426/002-030 | Eddy-Current Sensor, 11 mm, heavy-duty |
| PR6425/010-030 | Eddy-Current Sensor, 25 mm, long range |
| CON041 | Proximity Transducer Driver for PR642x |
| TM0180 | Vibration Monitoring Module |
| PR6424/008-030 | Eddy-Current Sensor, 8 mm, custom build |
| PR9268/203-000 | Vibration Transducer for machinery health |
