Bently Nevada 330104-05-18-50-02-05 3300 XL 8 mm Proximity Probe

Product Introduction

The Bently Nevada 330104-05-18-50-02-05 3300 XL 8 mm Proximity Probe is a high-performance component designed for precise vibration and displacement measurement in rotating machinery. This probe belongs to the renowned 3300 XL series, which is widely recognized in industrial condition monitoring systems for its accuracy, stability, and durability in harsh environments. It is specifically engineered to interface seamlessly with Bently Nevada proximity transducer systems, ensuring reliable measurements under a wide range of operating conditions.

---

Product Parameters

---

Product Applications

• Steam turbines, gas turbines, and hydro turbines.

• Compressors, pumps, and motors.

• Gearboxes and critical process machinery.

• Monitoring shaft vibration, radial displacement, and axial position.

• Integration into Bently Nevada monitoring systems for predictive maintenance.

---

Product Advantages

• High Accuracy: Provides reliable shaft displacement and vibration measurements for critical rotating equipment.

• Rugged Design: Withstands high temperatures and harsh industrial environments.

• Excellent Compatibility: Fully compatible with 3300 XL proximitor sensors and monitoring systems.

• Long-Term Stability: Offers consistent calibration over extended operating cycles.

• Enhanced Safety: Supports predictive maintenance strategies that help reduce unexpected machine failures.

• Flexible Installation: Designed with secure mounting options and cable length suitable for industrial setups.

---

FAQ

Q1: What type of sensor technology does this probe use?
A1: It uses non-contact eddy current technology for accurate shaft displacement measurement.

Q2: Can the probe operate in high-temperature environments?
A2: Yes, it is designed for operating temperatures up to +180 °C.

Q3: Is the probe compatible with older Bently Nevada proximitor models?
A3: It is fully compatible with the 3300 XL Proximitor sensors, and backward compatibility depends on system calibration.

Q4: How does the probe ensure signal integrity over long cable lengths?
A4: It uses a shielded coaxial cable design that minimizes electrical noise and interference.

Q5: What is the typical sensitivity calibration of this probe?
A5: It is factory calibrated for 200 mV/mil (7.87 mV/µm).

Q6: Can this probe detect both radial and axial shaft movement?
A6: Yes, it can be configured for radial vibration, shaft displacement, and axial position monitoring.

Q7: How is the probe mounted to the machine?
A7: It is mounted using a threaded housing that ensures secure and vibration-resistant installation.

Q8: Does the probe require recalibration after installation?
A8: No, it comes pre-calibrated, but system-level verification may be required.

Q9: How does the probe handle electromagnetic interference in industrial environments?
A9: The integral shielding in the cable and probe construction significantly reduces EMI influence.

Q10: What monitoring systems can this probe integrate with?
A10: It integrates with Bently Nevada 3300 XL Proximitor and monitoring systems like 3500 Series and other compatible platforms.

---

Recommended Same-Series or Related Models

---

Popular Same-Brand Models

FAQ

Q1: What type of sensor technology does this probe use?
A1: It uses non-contact eddy current technology for accurate shaft displacement measurement.

Q2: Can the probe operate in high-temperature environments?
A2: Yes, it is designed for operating temperatures up to +180 °C.

Q3: Is the probe compatible with older Bently Nevada proximitor models?
A3: It is fully compatible with the 3300 XL Proximitor sensors, and backward compatibility depends on system calibration.

Q4: How does the probe ensure signal integrity over long cable lengths?
A4: It uses a shielded coaxial cable design that minimizes electrical noise and interference.

Q5: What is the typical sensitivity calibration of this probe?
A5: It is factory calibrated for 200 mV/mil (7.87 mV/µm).

Q6: Can this probe detect both radial and axial shaft movement?
A6: Yes, it can be configured for radial vibration, shaft displacement, and axial position monitoring.

Q7: How is the probe mounted to the machine?
A7: It is mounted using a threaded housing that ensures secure and vibration-resistant installation.

Q8: Does the probe require recalibration after installation?
A8: No, it comes pre-calibrated, but system-level verification may be required.

Q9: How does the probe handle electromagnetic interference in industrial environments?
A9: The integral shielding in the cable and probe construction significantly reduces EMI influence.

Q10: What monitoring systems can this probe integrate with?
A10: It integrates with Bently Nevada 3300 XL Proximitor and monitoring systems like 3500 Series and other compatible platforms.

Recommended Same-Series or Related Models

---

Popular Same-Brand Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.