ABB XV C723 AE08 3BHB002953R0108 Current Measuring Instrument

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The ABB XV C723 AE08 3BHB002953R0108 Current Measuring Instrument is a high-precision current sensing and monitoring module designed for ABB’s advanced drive and converter systems. It provides real-time measurement, isolation, and transmission of current feedback signals to control units within industrial automation, power conversion, and medium-voltage drive systems.

This instrument is an essential element within ABB’s drive architecture, where accurate current detection is required for motor control, protection, and diagnostics. By converting measured current into a proportional analog or digital signal, the XV C723 AE08 ensures precise feedback for current loops, protection functions, and system optimization.

Built for robustness, it combines galvanic isolation, high accuracy, and low thermal drift, enabling dependable operation in environments with electrical noise and high dynamic load changes. Its modular design allows seamless integration with ABB converter platforms such as ACS6000, ACS1000, and MEGADRIVE-LCI, ensuring superior current control across wide industrial applications.

---

Technical Specifications

---

Product Applications

The ABB XV C723 AE08 module serves as a precision current measurement unit used across a broad range of industrial power conversion and automation systems. Its function extends beyond simple current detection — it forms a critical feedback link in the closed-loop control of drives and converters.

Typical application fields include:

• Medium-Voltage Drives: Monitors motor current for precise torque and speed control in ABB ACS series drives.

• Inverter and Converter Systems: Provides current feedback for control algorithms managing DC/AC or AC/DC conversion.

• Power Generation and Distribution: Ensures real-time monitoring of current flow in generator and grid interfaces.

• Renewable Energy Systems: Used in wind turbine converters and solar inverter systems for current balancing and fault detection.

• Process Automation: Supports current-controlled process actuators, pumps, and compressors.

• Test Benches and Simulation Systems: Offers reliable current measurement for laboratory testing of power electronics.

With its high response speed and linear accuracy, the XV C723 AE08 enhances control precision, protects semiconductor components, and supports predictive maintenance functions within ABB’s advanced industrial platforms.

---

Product Advantages

• High Accuracy Measurement: Offers precise current feedback with less than 0.2% deviation, ensuring stable drive performance.

• Wide Dynamic Range: Capable of accurately detecting both small and high current variations up to 300 A peak.

• Excellent Electrical Isolation: 3000 Vrms insulation ensures full protection between power and control circuits.

• Fast Signal Response: <2 µs response enables real-time feedback for high-speed control systems.

• Robust Protection Functions: Built-in overcurrent, thermal, and polarity protection for safe and reliable operation.

• Temperature Stability: Low drift and stable output ensure consistent performance under fluctuating thermal conditions.

• Modular Integration: Fits seamlessly into ABB converter frames and drive modules for easy installation.

• No External Calibration Needed: Factory-calibrated accuracy reduces setup time and maintenance cost.

• Noise Immunity: Designed to operate in high-EMI industrial environments without signal interference.

• Global Compatibility: Fully compliant with ABB’s industrial drive standards and regulatory certifications.

---

Frequently Asked Questions

1. What type of current does the XV C723 AE08 measure?
   It can measure both AC and DC current within the ±100 A nominal range.

2. How is the measurement signal transmitted to the control system?
   The output is a 0–10 V or ±10 V analog signal, proportional to the input current.

3. Does this module provide galvanic isolation?
   Yes, the unit offers 3000 Vrms isolation between the power and measurement circuits.

4. Can the XV C723 AE08 handle overcurrent conditions?
   It has built-in overcurrent and thermal protection to prevent damage during transient overloads.

5. What is the response time of the measurement signal?
   The typical signal response time is less than 2 microseconds, ideal for dynamic drive systems.

6. Is external calibration required before use?
   No, the device is factory-calibrated for accuracy; optional manual offset trim is available.

7. What kind of noise immunity does this instrument provide?
   The module is designed for high EMI resistance, using shielded circuitry and optical isolation.

8. What happens if reverse polarity is applied to the supply terminals?
   Reverse polarity protection prevents the module from being damaged by incorrect wiring.

9. Is it compatible with ABB ACS6000 converters?
   Yes, it is fully compatible with ABB ACS6000 and other medium-voltage drive systems.

10. Can it be used in parallel current measurement configurations?
    Yes, multiple XV C723 AE08 units can be configured for multi-phase or redundant measurement setups.

---

Related Models (Same Series or Function Family)

---

Popular ABB Models (Same Brand, High Demand)

---

Frequently Asked Questions

1. What type of current does the XV C723 AE08 measure?
   It can measure both AC and DC current within the ±100 A nominal range.

2. How is the measurement signal transmitted to the control system?
   The output is a 0–10 V or ±10 V analog signal, proportional to the input current.

3. Does this module provide galvanic isolation?
   Yes, the unit offers 3000 Vrms isolation between the power and measurement circuits.

4. Can the XV C723 AE08 handle overcurrent conditions?
   It has built-in overcurrent and thermal protection to prevent damage during transient overloads.

5. What is the response time of the measurement signal?
   The typical signal response time is less than 2 microseconds, ideal for dynamic drive systems.

6. Is external calibration required before use?
   No, the device is factory-calibrated for accuracy; optional manual offset trim is available.

7. What kind of noise immunity does this instrument provide?
   The module is designed for high EMI resistance, using shielded circuitry and optical isolation.

8. What happens if reverse polarity is applied to the supply terminals?
   Reverse polarity protection prevents the module from being damaged by incorrect wiring.

9. Is it compatible with ABB ACS6000 converters?
   Yes, it is fully compatible with ABB ACS6000 and other medium-voltage drive systems.

10. Can it be used in parallel current measurement configurations?
    Yes, multiple XV C723 AE08 units can be configured for multi-phase or redundant measurement setups.

Related Models (Same Series or Function Family)

---

Popular ABB Models (Same Brand, High Demand)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.