ABB CI541V1 3BSE014666R1 Profibus Interface Submodule

Product Introduction

The ABB CI541V1 (3BSE014666R1) is a Profibus-DP communication interface module designed to integrate field-level devices with ABB’s AC 800M control system. Engineered to handle demanding industrial communication requirements, this submodule serves as a powerful link between central controllers and distributed I/O stations or intelligent field devices.

Functioning as a master or slave device, the CI541V1 supports cyclic and acyclic data transfer, diagnostics, and parameterization tasks over Profibus. The module complies with Profibus-DP (Decentralized Peripherals) standards and ensures robust and deterministic data transmission in high-noise industrial environments.

Designed to be used with ABB’s PM862, PM864, PM866, and PM891 controllers, the CI541V1 plays a critical role in building a flexible, scalable automation solution for industries such as chemicals, oil & gas, power generation, and discrete manufacturing.

Product Specifications

Applications

The CI541V1 Profibus Submodule is optimized for automation systems that require stable, high-speed communication with field devices in the following areas:

• Process Automation: Integration of field transmitters and actuators with ABB control systems in chemical, pharmaceutical, and petrochemical plants.

• Discrete Manufacturing: Communication with PLCs, sensors, and servo drives in automotive, packaging, and material handling sectors.

• Energy and Utilities: Used in substations and renewable energy plants for SCADA-level communication and remote I/O access.

• Oil & Gas Facilities: Links intelligent devices in upstream, midstream, and downstream oil & gas operations.

• Water and Wastewater: Connects decentralized control units and monitoring sensors across treatment facilities.

• Industrial Equipment OEMs: Ideal for building modular machine control systems with Profibus support.

Product Advantages

• High Compatibility: Seamlessly integrates with ABB’s AC 800M family and widely supported by standard Profibus-DP devices.

• Reliable Communication: Designed for real-time, deterministic data exchange even in electrically noisy environments.

• Flexible Functionality: Can operate as either a master or slave device, adapting to diverse system architectures.

• Compact Design: Fits directly into the base unit of the AC 800M controllers without additional cabling.

• LED Diagnostics: Built-in LED indicators for module and bus status help simplify troubleshooting.

• Rugged Construction: Engineered to withstand industrial temperature, vibration, and humidity requirements.

• Global Standards Compliance: Certified to meet international safety and electromagnetic compatibility requirements.

Frequently Asked Questions (FAQ)

1. What does the ABB CI541V1 submodule do?
   It enables Profibus-DP communication between ABB AC 800M controllers and field devices such as I/O modules, drives, and transmitters.

2. Can the CI541V1 act as both a master and slave on the Profibus network?
   Yes, the module can be configured as either a master or a slave depending on the application.

3. What types of devices are supported on the Profibus side?
   It supports most standard Profibus-DP compliant devices, including I/O modules, smart sensors, actuators, and drives.

4. Does the CI541V1 support hot-swapping?
   No, hot-swapping is not supported. Always power down the system before inserting or removing the module.

5. How do I connect the module to the Profibus network?
   Via a standard 9-pin D-sub connector using RS485 wiring, with termination resistors as needed.

6. Which controllers is the CI541V1 compatible with?
   It works with ABB AC 800M controllers including PM862, PM864, PM866, and PM891.

7. What is the maximum supported baud rate?
   The module supports up to 12 Mbps on the Profibus network.

8. Are there built-in diagnostic tools or indicators?
   Yes, the front panel has LED indicators that show bus status, module status, and communication health.

9. What power source is required?
   It draws power directly from the base unit of the controller it is installed in.

10. Can I use this module in hazardous areas?
    It depends on the control cabinet and overall system certification. The module itself is not ATEX certified but can be used in compliant enclosures.

Related Models from the Same Series or Application

Popular ABB Models Across Automation and Control

Frequently Asked Questions (FAQ)

1. What does the ABB CI541V1 submodule do?
   It enables Profibus-DP communication between ABB AC 800M controllers and field devices such as I/O modules, drives, and transmitters.

2. Can the CI541V1 act as both a master and slave on the Profibus network?
   Yes, the module can be configured as either a master or a slave depending on the application.

3. What types of devices are supported on the Profibus side?
   It supports most standard Profibus-DP compliant devices, including I/O modules, smart sensors, actuators, and drives.

4. Does the CI541V1 support hot-swapping?
   No, hot-swapping is not supported. Always power down the system before inserting or removing the module.

5. How do I connect the module to the Profibus network?
   Via a standard 9-pin D-sub connector using RS485 wiring, with termination resistors as needed.

6. Which controllers is the CI541V1 compatible with?
   It works with ABB AC 800M controllers including PM862, PM864, PM866, and PM891.

7. What is the maximum supported baud rate?
   The module supports up to 12 Mbps on the Profibus network.

8. Are there built-in diagnostic tools or indicators?
   Yes, the front panel has LED indicators that show bus status, module status, and communication health.

9. What power source is required?
   It draws power directly from the base unit of the controller it is installed in.

10. Can I use this module in hazardous areas?
    It depends on the control cabinet and overall system certification. The module itself is not ATEX certified but can be used in compliant enclosures.

Related Models from the Same Series or Application

Popular ABB Models Across Automation and Control

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.