Bently Nevada 330104-00-18-10-02-05 3300 XL 8 mm Proximity Probe

Product Overview:

The Bently Nevada 330104-00-18-10-02-05 3300 XL 8 mm Proximity Probe is a precision-engineered sensor designed for critical machinery condition monitoring. As part of the robust 3300 XL product family, it is built for use in environments where accuracy, reliability, and ruggedness are essential. This non-contact proximity probe provides continuous measurements of shaft displacement and vibration, making it indispensable for turbine, motor, pump, and compressor monitoring. The 330104-00-18-10-02-05 variant is designed to meet industry demands with a specific cable length and connector configuration, ideal for customized installations in complex industrial setups.

Key Features:

• Non-contact Measurement Technology: Ensures accurate shaft vibration and position detection.

• Durable and Robust: Stainless steel construction suitable for harsh industrial environments.

• Wide Operating Temperature Range: Performs reliably in both low and high-temperature applications.

• High Compatibility: Works seamlessly with Bently Nevada 3300 XL extension cables and drivers.

• Voltage Signal Output: Delivers linear and proportional voltage output for effective monitoring.

• Long-term Stability: Engineered for minimal drift and consistent signal over extended service life.

Technical Specifications:

Industry Applications:

This proximity probe model is widely used in critical rotating machinery across multiple industries, including:

• Power Generation: Steam and gas turbine shaft monitoring.

• Oil & Gas: Compressor and pump vibration analysis.

• Petrochemical Processing: Equipment health tracking in refineries and chemical plants.

• Water Treatment: Monitoring of rotating pumps and drives.

• Paper & Pulp: Roll and motor condition monitoring.

• Heavy Manufacturing: Gearbox and motor shaft displacement measurements.

Advantages:

• Minimized Downtime: Enables early detection of mechanical faults, reducing unexpected failures.

• Extended Machine Life: Helps maintain optimal alignment and operating conditions.

• Predictive Maintenance Support: Enables trend analysis and data-driven maintenance decisions.

• Versatile Integration: Easy to pair with drivers, cables, and monitoring systems.

• Compact Design: Slim dimensions fit into tight spaces around complex machinery.

• High Environmental Tolerance: Performs reliably in dusty, wet, and high-vibration settings.

Frequently Asked Questions (FAQ):

1. What is the cable length of this probe?

   It comes with an 18-foot (5.5-meter) cable, suitable for medium-range installations.

2. Can this proximity probe be used in high-temperature environments?

   Yes, it operates reliably up to +177°C.

3. Is the probe compatible with older Bently Nevada monitors?

   Yes, it maintains backward compatibility with most legacy systems.

4. What type of output signal does it provide?

   It produces a voltage signal proportional to the measured shaft-to-probe gap.

5. What is the typical measurement range for shaft displacement?

   The probe typically measures from 0 to 2 mm.

6. What thread type is used for mounting?

   It uses a standard 3/8-24 UNF-2A mounting thread.

7. Can this probe be used in outdoor or wet environments?

   Yes, when properly installed, it meets IP66 protection standards.

8. Does the probe require periodic recalibration?

   No frequent recalibration is needed; it is factory calibrated for long-term stability.

9. What systems can this probe integrate with?

   It is designed to work with 3300 XL extension cables and proximity sensor drivers.

10. What industries benefit most from this probe?

    It is extensively used in power generation, oil and gas, chemicals, and manufacturing sectors.

Recommended Model

Popular Bently Nevada Models:

Frequently Asked Questions (FAQ):

1. What is the cable length of this probe?

   It comes with an 18-foot (5.5-meter) cable, suitable for medium-range installations.

2. Can this proximity probe be used in high-temperature environments?

   Yes, it operates reliably up to +177°C.

3. Is the probe compatible with older Bently Nevada monitors?

   Yes, it maintains backward compatibility with most legacy systems.

4. What type of output signal does it provide?

   It produces a voltage signal proportional to the measured shaft-to-probe gap.

5. What is the typical measurement range for shaft displacement?

   The probe typically measures from 0 to 2 mm.

6. What thread type is used for mounting?

   It uses a standard 3/8-24 UNF-2A mounting thread.

7. Can this probe be used in outdoor or wet environments?

   Yes, when properly installed, it meets IP66 protection standards.

8. Does the probe require periodic recalibration?

   No frequent recalibration is needed; it is factory calibrated for long-term stability.

9. What systems can this probe integrate with?

   It is designed to work with 3300 XL extension cables and proximity sensor drivers.

10. What industries benefit most from this probe?

    It is extensively used in power generation, oil and gas, chemicals, and manufacturing sectors.

Recommended Model

Popular Bently Nevada Models:

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.