Bently Nevada 3500/92-04-01 Communication Gateway Module

Product Overview

The Bently Nevada 3500/92-04-01 Communication Gateway Module enables the integration of 3500 Series system data into plant-wide monitoring and automation networks. Supporting Modbus serial, Modbus TCP/IP, and proprietary Bently Nevada Ethernet protocols, it facilitates real-time data exchange, status monitoring, and control system integration. It also connects with configuration and data acquisition software via Ethernet.

---

Applications

• Machinery protection and monitoring systems

• Integration with Distributed Control Systems (DCS)

• Data acquisition for rotating equipment

• Oil & gas, power generation, petrochemical plants

• Marine and offshore platforms

• Condition monitoring systems requiring Modbus TCP or Serial communication

---

Advantages

• Supports multiple communication protocols (Modbus RTU, TCP, Bently Ethernet)

• High-speed data access from all modules in the rack

• LED indicators for quick status verification

• Compatible with existing 3500/90 infrastructure

• Rugged design for harsh industrial environments

• Modular I/O options to meet varied installation requirements

---

Technical Specifications

---

Frequently Asked Questions (FAQ)

Q1: What protocols are supported by the 3500/92-04-01?
A: It supports Modbus RTU (RS232/RS485), Modbus TCP/IP, and Bently Nevada Host Protocol.

Q2: Is the module compatible with older 3500/90 systems?
A: Yes, with the exception of the original primary value Modbus registers, which are now replaced by a Configurable Modbus Register Utility.

Q3: What are the communication interface options?
A: Ethernet (RJ-45, 10BASE-T), RS232, RS422, and RS485.

Q4: Can it connect directly to configuration software?
A: Yes, it communicates directly with Bently Nevada 3500 Configuration and Data Acquisition Software via Ethernet.

Q5: What’s the update rate of data acquisition?
A: It collects data from all rack modules in ≤1 second, depending on rack configuration.

Q6: What environmental conditions can it withstand?
A: Operating range from -30°C to +65°C; humidity up to 95% non-condensing.

Q7: What is the power requirement?
A: 5.0W for RS232/RS422, and 5.6W for RS485 configurations.

Q8: Does it have LED indicators?
A: Yes, there are OK and TX/RX LEDs for operational and communication status.

Q9: How much rack space is needed?
A: One full-height slot in the front and one in the rear.

Q10: Is it certified for hazardous area installation?
A: Yes, it has CSA, ATEX, IECEx, and marine certifications for use in hazardous areas.

---

Related or Similar Models

---

Popular Bently Nevada Models

Frequently Asked Questions (FAQ)

Q1: What protocols are supported by the 3500/92-04-01?
A: It supports Modbus RTU (RS232/RS485), Modbus TCP/IP, and Bently Nevada Host Protocol.

Q2: Is the module compatible with older 3500/90 systems?
A: Yes, with the exception of the original primary value Modbus registers, which are now replaced by a Configurable Modbus Register Utility.

Q3: What are the communication interface options?
A: Ethernet (RJ-45, 10BASE-T), RS232, RS422, and RS485.

Q4: Can it connect directly to configuration software?
A: Yes, it communicates directly with Bently Nevada 3500 Configuration and Data Acquisition Software via Ethernet.

Q5: What’s the update rate of data acquisition?
A: It collects data from all rack modules in ≤1 second, depending on rack configuration.

Q6: What environmental conditions can it withstand?
A: Operating range from -30°C to +65°C; humidity up to 95% non-condensing.

Q7: What is the power requirement?
A: 5.0W for RS232/RS422, and 5.6W for RS485 configurations.

Q8: Does it have LED indicators?
A: Yes, there are OK and TX/RX LEDs for operational and communication status.

Q9: How much rack space is needed?
A: One full-height slot in the front and one in the rear.

Q10: Is it certified for hazardous area installation?
A: Yes, it has CSA, ATEX, IECEx, and marine certifications for use in hazardous areas.

Related or Similar Models

---

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.