Company Information | ||||||||
[email protected] | ||||||||
Mobile | +8613666033393 | |||||||
+8613666033393 | ||||||||
13666033393 | ||||||||
Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Product Introduction
The ABB UNS 0890a-P,V3 3BHE018297R0003 Power System Stabilizer is a high-performance digital control device engineered to enhance the stability and dynamic performance of power generation systems. It is designed to reduce low-frequency oscillations in large interconnected networks, ensuring that generators remain synchronized under varying load and fault conditions.
This model represents the V3 variant of ABB’s UNS 0890a-P series, offering advanced algorithms, flexible configuration options, and superior immunity to grid disturbances. By interfacing directly with excitation control systems, it provides real-time corrective signals to improve damping torque, thereby reducing the risk of instability during transients or system upsets.
Its rugged construction, precise measurement circuits, and adaptive control logic make it an essential component for modern utilities, industrial power plants, and any critical power system requiring maximum reliability and efficiency.
Product Parameters
Parameter | Specification |
---|---|
Product Model | ABB UNS 0890a-P,V3 3BHE018297R0003 |
Product Type | Digital Power System Stabilizer |
Control Technology | Digital Signal Processing (DSP) with adaptive control algorithms |
Operating Voltage | 24 VDC (control power), signal inputs per CT/VT standards |
Input Types | Voltage Transformer (VT), Current Transformer (CT), and generator speed sensor inputs |
Communication Interfaces | RS-485 / Ethernet, Modbus RTU/TCP, ABB proprietary protocol |
Protection Features | Over-voltage, under-voltage, input signal loss detection, thermal protection |
Response Time | Millisecond-level corrective action |
Operating Temperature Range | -20°C to +60°C |
Storage Temperature Range | -40°C to +85°C |
Mounting Type | Panel or rack-mount |
Enclosure Protection | IP20 (others available on request) |
Dimensions (W × H × D) | 140 × 135 × 140 mm |
Weight | 0.26 kg |
Compliance Standards | IEC 60255, IEC 61000-4, IEEE PSS standards |
Product Applications
-
Utility Power Grids – Damping low-frequency inter-area oscillations and improving network stability.
-
Thermal Power Plants – Enhancing generator response during load changes and faults.
-
Hydroelectric Plants – Maintaining synchronism during rapid water flow variations and operational switching.
-
Industrial Captive Power Systems – Ensuring stability in isolated or weak grid configurations.
-
Renewable Integration – Supporting generators operating in grids with high renewable penetration to manage stability issues.
-
Emergency Grid Support – Providing fast corrective actions during contingencies to prevent cascading failures.
Product Advantages
-
Advanced DSP Technology – Real-time signal processing ensures fast and precise corrective actions.
-
Adaptive Control Algorithms – Automatically adjust to changing grid conditions without manual tuning.
-
Seamless Integration – Compatible with ABB UNITROL systems and most third-party excitation controllers.
-
High Reliability Design – Built to operate in harsh electrical environments with strong noise immunity.
-
Redundancy Support – Can be deployed in hot-standby configurations for critical applications.
-
Flexible Configuration – Multiple operational modes (SISO, MIMO) to match various generator setups.
-
Comprehensive Protection – Built-in diagnostics and fault detection ensure safe operation.
-
Simulation-Ready – Compatible with hardware-in-the-loop (HIL) testing for pre-commissioning verification.
FAQ
1. What control algorithms does the UNS 0890a-P,V3 use to stabilize the system?
It uses phase compensation, lead-lag control, and adaptive damping algorithms to counteract electromechanical oscillations.
2. Can it operate with multiple input channels for different signals?
Yes, it supports multiple voltage, current, and speed sensor inputs with configurable scaling.
3. How quickly can the stabilizer apply corrective output after disturbance detection?
It operates at millisecond response speed, ensuring timely damping action.
4. Does the stabilizer support integration with SCADA systems?
Yes, it offers Modbus RTU/TCP and ABB proprietary protocols for SCADA integration.
5. Can the control settings be updated remotely?
Yes, firmware and parameter adjustments can be performed remotely via secure communication interfaces.
6. How does it reject noise and harmonics from the power grid?
It includes multi-stage digital filtering and high CMRR input circuits to filter unwanted components.
7. Is it capable of damping inter-area oscillations in large interconnected grids?
Yes, it is specifically engineered for both local and inter-area oscillation mitigation.
8. Can the stabilizer be tested offline before commissioning?
Yes, it supports HIL and closed-loop simulation testing.
9. Does it provide event logging for disturbance analysis?
Yes, it includes onboard event recording with time-stamped data for post-event review.
10. Can the stabilizer be used in redundant configurations for critical systems?
Yes, it supports hot-standby redundancy for uninterrupted operation.
Recommended Related Models (Same Series / Related Type)
Model | Description |
---|---|
UNS 0890a-P,V1 3BHE018297R0001 | Power System Stabilizer, V1 version, base functionality |
UNS 0890a-P,V2 3BHE018297R0002 | Power System Stabilizer, V2 with enhanced DSP features |
UNS 0890a-C,V1 3BHE018298R0001 | Power System Stabilizer, Compact version |
UNS 0890b-P,V1 3BHE018299R0001 | Power System Stabilizer, alternative hardware variant |
UNS 0889a-P,V1 3BHE018290R0001 | Predecessor model with standard stabilization algorithms |
UNS 0890a-P,V3-R 3BHE018297R0004 | Redundant version for high-availability systems |
Popular ABB Models (Different Product Lines)
Model | Description |
---|---|
UNITROL 6000 | High-performance automatic voltage regulator system |
REG670 | ABB protection relay for generator and transformer applications |
REF615 | Feeder protection and control relay |
RET670 | Transformer protection IED |
REC670 | Control and protection relay for substation automation |
REX640 | All-in-one protection and control device |