Bently Nevada 330102-00-20-10-12-05 3300 XL 8 mm Proximity Probe

Product Introduction

The Bently Nevada 330102-00-20-10-12-05 is a high-performance 8 mm proximity probe from the 3300 XL series, designed for precise vibration and position monitoring in industrial machinery. This robust sensor is widely used in critical applications such as turbines, compressors, and pumps, providing reliable data for predictive maintenance and operational efficiency. Its durable construction and advanced sensing technology make it a preferred choice for harsh industrial environments.

Product Parameters

Product Applications

The Bently Nevada 3300 XL 8 mm proximity probe is ideal for:

• Turbine Monitoring: Detects shaft vibration and eccentricity in steam and gas turbines.

• Compressor Protection: Monitors radial and axial displacement in centrifugal and reciprocating compressors.

• Pump Systems: Ensures alignment and detects bearing wear in high-speed pumps.

• Electric Motors: Tracks rotor dynamics and prevents unbalance issues.

• Generators: Safeguards against excessive vibration in power generation equipment.

• Oil & Gas Machinery: Used in refineries and pipelines for condition monitoring.

Product Advantages

1. High Accuracy: Delivers precise measurements for critical machinery health assessment.

2. Durability: Stainless steel construction resists corrosion and mechanical stress.

3. Wide Temperature Range: Operates reliably in extreme environments.

4. Easy Integration: Compatible with Bently Nevada monitoring systems and third-party hardware.

5. Long Service Life: Robust design minimizes maintenance requirements.

6. IP67 Protection: Suitable for dusty and wet conditions.

7. Customizable Cable Length: Adapts to various installation needs.

Frequently Asked Questions (FAQ)

1. What is the operating voltage range for this probe?
   The probe requires a power supply of -18 V to -24 V DC.

2. Can the cable length be customized?
   Yes, the standard cable is 1 m, but longer or shorter lengths can be specified.

3. Is the probe suitable for hazardous environments?
   While it has an IP67 rating, additional certifications may be needed for explosive atmospheres.

4. How do I calibrate the 3300 XL probe?
   Calibration requires a Bently Nevada tester or compatible diagnostic tool.

5. What is the linear range of the output signal?
   The output ranges from -2 V to -18 V DC over the specified gap.

6. Can this probe measure thrust position?
   Yes, when used with a dual-channel monitor, it can measure axial displacement.

7. What is the recommended gap voltage?
   Typically, -10 V DC is the optimal gap voltage for most applications.

8. Does the probe require periodic maintenance?
   No, it is maintenance-free under normal operating conditions.

9. Is the probe compatible with non-Bently Nevada systems?
   Yes, but signal conditioning may be needed for some third-party systems.

10. What is the lifespan of the probe?
    With proper installation, the probe can last 5+ years in typical industrial environments.

Recommended Related & Popular Models

Same Series (3300 XL Probes)

Popular Bently Nevada Models

Frequently Asked Questions (FAQ)

1. What is the operating voltage range for this probe?
   The probe requires a power supply of -18 V to -24 V DC.

2. Can the cable length be customized?
   Yes, the standard cable is 1 m, but longer or shorter lengths can be specified.

3. Is the probe suitable for hazardous environments?
   While it has an IP67 rating, additional certifications may be needed for explosive atmospheres.

4. How do I calibrate the 3300 XL probe?
   Calibration requires a Bently Nevada tester or compatible diagnostic tool.

5. What is the linear range of the output signal?
   The output ranges from -2 V to -18 V DC over the specified gap.

6. Can this probe measure thrust position?
   Yes, when used with a dual-channel monitor, it can measure axial displacement.

7. What is the recommended gap voltage?
   Typically, -10 V DC is the optimal gap voltage for most applications.

8. Does the probe require periodic maintenance?
   No, it is maintenance-free under normal operating conditions.

9. Is the probe compatible with non-Bently Nevada systems?
   Yes, but signal conditioning may be needed for some third-party systems.

10. What is the lifespan of the probe?
    With proper installation, the probe can last 5+ years in typical industrial environments.

Recommended Related & Popular Models

Same Series (3300 XL Probes)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.