Bently Nevada 330101-00-20-20-02-00 3300 XL 8mm Proximity Probe

Product Introduction

The Bently Nevada 330101-00-20-20-02-00 3300 XL 8mm Proximity Probe is a high-performance eddy current sensor designed for precise vibration and position measurements in rotating machinery. As part of the 3300 XL 8 mm series, it provides reliable operation under harsh industrial conditions, ensuring long-term stability and compliance with API 670 standards.

---

Technical Specifications

---

Product Applications

• Vibration Monitoring: Continuous shaft vibration measurement in turbines, compressors, and motors.

• Position Measurement: Shaft axial and radial position monitoring for fluid-film bearing machines.

• Keyphasor Applications: Accurate phase reference and rotational speed measurement.

• Condition Monitoring Systems: Used with 3300 XL extension cables and Proximitor sensors in machinery protection systems.

• Harsh Environments: Designed for areas with high temperature fluctuations and mechanical stress.

---

Product Advantages

• Full Interchangeability: Compatible with any 3300 XL 8 mm system without calibration.

• Durability: PPS encapsulation and reinforced CableLoc design enhance probe life under stress.

• Secure Connections: ClickLoc gold-plated connectors resist loosening and ensure stable signal transmission.

• API 670 Compliance: Meets international standards for machinery protection.

• High Accuracy: Stable and repeatable measurements even in severe operating conditions.

• Backward Compatibility: Can be used with non-XL 3300 systems (performance defaults to non-XL limits).

---

FAQ

Q1: What is the main function of the 330101-00-20-20-02-00 probe?
A1: It measures shaft vibration and position in rotating machinery using eddy current technology.

Q2: What is the total cable length of this probe?
A2: The total cable length is 2.0 meters (6.6 ft).

Q3: What environmental conditions can it operate in?
A3: It can operate and be stored in –51 °C to +177 °C environments.

Q4: Does this probe comply with API 670 requirements?
A4: Yes, it fully meets API 670 standards for proximity transducer systems.

Q5: How is the probe tip secured against mechanical stress?
A5: It uses TipLoc molding and CableLoc reinforcement for increased pull strength and stability.

Q6: Is calibration required when replacing components in the system?
A6: No, all 3300 XL 8 mm system components are interchangeable without recalibration.

Q7: What connector type does this probe use?
A7: It uses a gold-plated ClickLoc miniature coaxial connector with a locking mechanism.

Q8: Can it be used for Keyphasor applications?
A8: Yes, it is suitable for speed and phase reference measurements.

Q9: What is the weight of this probe?
A9: The weight is approximately 0.646 kg.

Q10: Is this model compatible with older 3300 systems?
A10: Yes, but performance will be limited to non-XL specifications when mixed with older system components.

---

Related Models in the Same Series

---

Popular Bently Nevada Models

Related Models in the Same Series

---

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.