Bently Nevada 330105-XX-XX-10-02-05 3300 XL 8 mm Reverse Mount Probes

Product Introduction

The Bently Nevada 330105-XX-XX-10-02-05 3300 XL 8 mm Reverse Mount Probe is a high-performance proximity sensor designed to provide accurate, reliable measurements of shaft vibration and position in rotating machinery. As part of the 3300 XL series, this probe offers advanced signal stability, excellent linearity, and robust construction tailored for critical machine monitoring applications.

The reverse mount design enables installation from the opposite side of the machine housing, making it particularly useful where standard forward mounting is not feasible due to space restrictions or structural limitations. Combined with stainless steel construction, superior noise immunity, and seamless compatibility with Bently Nevada monitoring systems, it ensures dependable machine protection in challenging environments.

Product Parameters

Product Applications

The 330105-XX-XX-10-02-05 probe is widely deployed in critical rotating equipment where accurate monitoring is essential. Typical applications include:

• Steam Turbines – Detects early signs of rotor instability and alignment issues.

• Gas Turbines – Monitors vibration behavior under high temperature and speed conditions.

• Compressors – Identifies oil whip, shaft eccentricity, and other rotor instabilities.

• Pumps – Provides real-time shaft vibration data for predictive maintenance.

• Generators and Motors – Ensures safe operation by detecting imbalance and bearing wear.

• Industrial Gearboxes – Tracks shaft position for improved reliability and reduced downtime.

Product Advantages

• Reverse Mount Capability: Facilitates installation in tight or restricted areas.

• Accurate Measurement: Maintains linear response with ≤ ±1% error.

• Robust Signal Quality: Resistant to electrical and magnetic interference.

• Durable Build: Stainless steel body ensures long-lasting field performance.

• Wide Frequency Range: Capable of detecting both static and dynamic behavior.

• Seamless Integration: Fully compatible with Bently Nevada drivers and monitors.

• High Reliability: Delivers consistent readings in extreme operating conditions.

• Enhanced Machine Protection: Provides early fault detection, reducing costly failures.

FAQ

1. What sensing technology does this probe use?
   It uses eddy current technology to detect the distance between the probe tip and a conductive target.

2. How is the signal transmitted from the probe?
   The probe connects through an extension cable to a driver module, which conditions the signal for monitoring systems.

3. What is the maximum frequency response supported?
   It supports a bandwidth from DC up to 20 kHz.

4. Can this probe measure both shaft position and vibration?
   Yes, it captures both static shaft displacement and dynamic vibration data.

5. Is additional field calibration necessary?
   No, the probe is factory calibrated for direct use with compatible Bently Nevada systems.

6. Why is the reverse mount configuration important?
   It allows installation from the rear of machine housings, useful in confined or obstructed setups.

7. What type of target materials are supported?
   The probe is optimized for conductive metallic targets, especially steel shafts.

8. How does the probe handle electrical interference?
   Its shielded cable and design minimize electromagnetic noise to preserve signal accuracy.

9. Is this probe suitable for monitoring high-speed turbines?
   Yes, its frequency response and precision make it ideal for high-speed turbine and compressor monitoring.

10. Which monitoring platforms are compatible with this probe?
    It integrates seamlessly with the Bently Nevada 3300 XL monitoring system and associated drivers.

Recommended Related Models (Same Series)

Popular Models from the Same Brand (Bently Nevada)

FAQ

1. What sensing technology does this probe use?
   It uses eddy current technology to detect the distance between the probe tip and a conductive target.

2. How is the signal transmitted from the probe?
   The probe connects through an extension cable to a driver module, which conditions the signal for monitoring systems.

3. What is the maximum frequency response supported?
   It supports a bandwidth from DC up to 20 kHz.

4. Can this probe measure both shaft position and vibration?
   Yes, it captures both static shaft displacement and dynamic vibration data.

5. Is additional field calibration necessary?
   No, the probe is factory calibrated for direct use with compatible Bently Nevada systems.

6. Why is the reverse mount configuration important?
   It allows installation from the rear of machine housings, useful in confined or obstructed setups.

7. What type of target materials are supported?
   The probe is optimized for conductive metallic targets, especially steel shafts.

8. How does the probe handle electrical interference?
   Its shielded cable and design minimize electromagnetic noise to preserve signal accuracy.

9. Is this probe suitable for monitoring high-speed turbines?
   Yes, its frequency response and precision make it ideal for high-speed turbine and compressor monitoring.

10. Which monitoring platforms are compatible with this probe?
    It integrates seamlessly with the Bently Nevada 3300 XL monitoring system and associated drivers.

Recommended Related Models (Same Series)

Popular Models from the Same Brand (Bently Nevada)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.