Bently Nevada 330851-02-000-110-10-00-CN 3300 XL 25 mm Proximity Probe

Product Introduction

The Bently Nevada 330851-02-000-110-10-00-CN 3300 XL 25 mm Proximity Probe is part of the 3300 XL series of proximity probes designed for high-reliability vibration monitoring in rotating machinery. This probe offers precision measurement of shaft displacement and vibration, enabling early detection of machinery faults. It is widely used in critical applications such as turbines, compressors, pumps, and generators where accurate and dependable monitoring is essential.

Technical Specifications

Product Applications

• Rotating Machinery Monitoring: Turbines, compressors, pumps, generators.

• Vibration Analysis: Early fault detection in bearings, shafts, and couplings.

• Process Safety: Monitoring critical rotating equipment to prevent unplanned shutdowns.

• Control System Integration: Feeding accurate shaft position and vibration data to Bently Nevada 3300 XL monitoring systems.

Product Advantages

• High Accuracy and Linearity: Ensures precise monitoring of shaft vibration and displacement.

• Rugged Design: Resistant to mechanical shock, vibration, and extreme temperatures.

• Interference Immunity: Minimal signal distortion from electromagnetic sources.

• Ease of Installation: Standardized connectors and flexible cabling allow quick deployment.

• Proven Reliability: Widely adopted in power generation, oil & gas, and industrial applications.

• Modular Integration: Seamlessly connects to Bently Nevada 3300 XL monitoring systems for real-time diagnostics.

FAQ

1. Q: What is the maximum tip vibration frequency this probe can accurately measure?
   A: Up to 25 kHz, consistent with the 3300 XL system requirements.

2. Q: Can this probe operate in high-humidity environments?
   A: Yes, it is designed to operate in relative humidity up to 95% non-condensing.

3. Q: Is the probe output compatible with standard 3300 XL monitors?
   A: Yes, the output signal is AC voltage, fully compatible with 3300 XL monitoring systems.

4. Q: Can the probe be used in explosive environments?
   A: Only when installed with appropriate explosion-proof housings and certified systems.

5. Q: What cable lengths are supported beyond the standard 1 m probe length?
   A: Custom cable lengths can be provided up to 30 m with factory calibration to maintain signal integrity.

6. Q: Does the probe require any calibration after installation?
   A: Initial calibration is recommended when first installed in the monitoring system to ensure accurate readings.

7. Q: How resistant is the probe to electromagnetic interference?
   A: Designed with shielding to maintain signal integrity in high EMI environments.

8. Q: Can the probe tip material affect measurement in metallic environments?
   A: The non-magnetic stainless steel tip ensures negligible interference with metallic components.

9. Q: Does this probe support differential measurements?
   A: It is single-ended; differential measurements require the associated monitoring module.

10. Q: Is the probe compatible with other vibration monitoring systems?
    A: It is optimized for the Bently Nevada 3300 XL system, but may work with other systems with appropriate signal conditioning.

Recommended 6 Same-Series or Related Models

Recommended 6 Popular Models from Bently Nevada

FAQ

1. Q: What is the maximum tip vibration frequency this probe can accurately measure?
   A: Up to 25 kHz, consistent with the 3300 XL system requirements.

2. Q: Can this probe operate in high-humidity environments?
   A: Yes, it is designed to operate in relative humidity up to 95% non-condensing.

3. Q: Is the probe output compatible with standard 3300 XL monitors?
   A: Yes, the output signal is AC voltage, fully compatible with 3300 XL monitoring systems.

4. Q: Can the probe be used in explosive environments?
   A: Only when installed with appropriate explosion-proof housings and certified systems.

5. Q: What cable lengths are supported beyond the standard 1 m probe length?
   A: Custom cable lengths can be provided up to 30 m with factory calibration to maintain signal integrity.

6. Q: Does the probe require any calibration after installation?
   A: Initial calibration is recommended when first installed in the monitoring system to ensure accurate readings.

7. Q: How resistant is the probe to electromagnetic interference?
   A: Designed with shielding to maintain signal integrity in high EMI environments.

8. Q: Can the probe tip material affect measurement in metallic environments?
   A: The non-magnetic stainless steel tip ensures negligible interference with metallic components.

9. Q: Does this probe support differential measurements?
   A: It is single-ended; differential measurements require the associated monitoring module.

10. Q: Is the probe compatible with other vibration monitoring systems?
    A: It is optimized for the Bently Nevada 3300 XL system, but may work with other systems with appropriate signal conditioning.

Recommended 6 Same-Series or Related Models

Recommended 6 Popular Models from Bently Nevada

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.