Bently Nevada 330904-04-08-05-02-RU 3300 NSv Proximity Probes

Product Introduction

The Bently Nevada 330904-04-08-05-02-RU 3300 NSv Proximity Probe is a compact, high-precision non-contact displacement and vibration sensor specifically engineered for continuous monitoring of rotating machinery. Designed to perform in confined spaces and harsh industrial conditions, the 3300 NSv series provides highly accurate measurements of shaft vibration and position using proven eddy-current technology. This model, with a total length of 0.5 meter and a light weight of 0.15 kg, ensures easy installation while maintaining the ruggedness and reliability required for critical equipment such as turbines, compressors, and high-speed motors. Its seamless compatibility with Bently Nevada monitoring systems makes it an essential component for predictive maintenance and condition-based monitoring programs.

---

Product Specifications

---

Applications

• Turbines and Generators – Continuous monitoring of rotor vibration and axial position to prevent catastrophic failures.

• Compressors and Pumps – Early detection of misalignment or imbalance for reduced downtime.

• Industrial Motors – Shaft position feedback to optimize performance and efficiency.

• Gearboxes – Identification of gear wear or improper alignment.

• Petrochemical Equipment – Integration into distributed control systems for plant-wide vibration analysis.

• High-Speed Rotating Machinery – Accurate data capture where compact probe dimensions are essential.

---

Advantages

• High Precision – Eddy current technology delivers stable, non-contact measurements for critical equipment.

• Compact & Lightweight – 0.5 m length and 0.15 kg weight simplify installation in restricted areas.

• Wide Temperature Range – Operates reliably from –40 °C to +125 °C.

• Robust Construction – Stainless-steel housing ensures durability in harsh industrial environments.

• Low-Noise Output – Shielded coaxial cable minimizes electrical interference.

• Flexible Mounting – Supports threaded and flanged options for a variety of machinery designs.

• Fast Frequency Response – Captures shaft vibration dynamics up to 10 kHz for high-speed applications.

• Proven Reliability – Part of the globally trusted Bently Nevada 3300 NSv series.

• Seamless System Integration – Fully compatible with Bently Nevada monitoring and protection systems.

• Predictive Maintenance Ready – Enables early detection of mechanical issues, reducing unplanned outages.

---

FAQ

1. What sensing principle does the 330904-04-08-05-02-RU use?
   It employs an eddy-current, non-contact measurement principle for accurate shaft vibration and displacement monitoring.

2. Is this probe compatible with standard Bently Nevada monitoring systems?
   Yes, it integrates seamlessly with 3300 NSv drivers and other Bently Nevada monitoring hardware.

3. What is the typical frequency response range?
   The probe supports a frequency response of 0–10 kHz, ideal for high-speed machinery.

4. How is the probe typically mounted?
   Installation can be accomplished with either threaded or flanged mounting to suit the application.

5. What type of output signal does it provide?
   It delivers an AC voltage signal proportional to shaft displacement.

6. Does it require regular recalibration?
   After proper initial setup with its driver, the probe generally maintains calibration for long-term operation without frequent adjustments.

7. What cable type is recommended for best performance?
   A low-noise shielded coaxial cable is recommended to minimize signal interference.

8. Can it operate in extreme temperature environments?
   Yes, the probe is designed for continuous operation from –40 °C to +125 °C.

9. How does it handle oil, dust, or moisture?
   The stainless-steel housing provides strong resistance to industrial contaminants and harsh conditions.

10. Is it suitable for small-shaft or confined-space applications?
    Absolutely, the compact 0.5 m design and small sensing area make it ideal for limited-space installations.

---

Related Models (Same Series)

---

Popular Bently Nevada Models

FAQ

1. What sensing principle does the 330904-04-08-05-02-RU use?
   It employs an eddy-current, non-contact measurement principle for accurate shaft vibration and displacement monitoring.

2. Is this probe compatible with standard Bently Nevada monitoring systems?
   Yes, it integrates seamlessly with 3300 NSv drivers and other Bently Nevada monitoring hardware.

3. What is the typical frequency response range?
   The probe supports a frequency response of 0–10 kHz, ideal for high-speed machinery.

4. How is the probe typically mounted?
   Installation can be accomplished with either threaded or flanged mounting to suit the application.

5. What type of output signal does it provide?
   It delivers an AC voltage signal proportional to shaft displacement.

6. Does it require regular recalibration?
   After proper initial setup with its driver, the probe generally maintains calibration for long-term operation without frequent adjustments.

7. What cable type is recommended for best performance?
   A low-noise shielded coaxial cable is recommended to minimize signal interference.

8. Can it operate in extreme temperature environments?
   Yes, the probe is designed for continuous operation from –40 °C to +125 °C.

9. How does it handle oil, dust, or moisture?
   The stainless-steel housing provides strong resistance to industrial contaminants and harsh conditions.

10. Is it suitable for small-shaft or confined-space applications?
    Absolutely, the compact 0.5 m design and small sensing area make it ideal for limited-space installations.

Related Models (Same Series)

---

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.