Bently Nevada 330905-12-22-05-02-05 3300 NSv Proximity Probes

Product Introduction

The Bently Nevada 330905-12-22-05-02-05 3300 NSv Proximity Probe is a high-precision, non-contact eddy-current sensor engineered to provide continuous monitoring of shaft vibration, dynamic displacement, and rotor position in critical rotating machinery. As part of the 3300 NSv (Narrow Side-view) series, this probe is designed for applications where installation space is limited, yet accurate and reliable vibration measurement is required. Its robust stainless-steel construction, precise calibration, and built-in EMI shielding ensure dependable performance under harsh industrial conditions, making it an essential component for predictive maintenance and machine protection programs across turbines, compressors, generators, and other mission-critical machinery.

Product Specifications

Applications

• Steam and Gas Turbines: Continuous monitoring of shaft vibration and displacement for early detection of rotor instability, imbalance, or misalignment.

• Compressors: Detects bearing wear, surge conditions, and cavitation-induced vibrations to avoid unplanned downtime.

• Electric Motors and Generators: Monitors shaft displacement and vibration to optimize operational efficiency and reduce mechanical failures.

• Gearboxes: Identifies misalignment, mechanical looseness, or gear mesh issues to support predictive maintenance strategies.

• Industrial Pumps: Monitors shaft deflection and dynamic instabilities to protect process-critical equipment.

• Fans and Blowers: Provides early warning of imbalance or bearing degradation through vibration analysis.

Advantages

• High Measurement Accuracy: Maintains excellent linearity and sensitivity for precise vibration and displacement monitoring.

• Compact Design: Slim 5 mm probe tip enables installation in tight or complex machinery spaces.

• Robust Construction: Stainless-steel housing ensures corrosion resistance and long-term durability in harsh environments.

• Wide Temperature Capability: Operates reliably from −35 °C to +177 °C.

• Integrated EMI Protection: Built-in shielding allows stable operation in high electromagnetic interference areas.

• Seamless System Integration: Fully compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems.

• Low Maintenance: Non-contact sensing minimizes wear, reducing downtime and service requirements.

FAQ

1. How is the 330905-12-22-05-02-05 probe calibrated to maintain measurement accuracy?
   Each probe is factory-calibrated using an AISI 4140 steel target to ensure precise sensitivity and linearity.

2. Can this probe interface with different Bently Nevada Proximitor drivers?
   Yes, it integrates seamlessly with the 3300 XL Proximitor and approved NSv extension cables.

3. What is the maximum vibration frequency range measurable by this probe?
   It can detect vibration signals up to 10 kHz within its specified linear range.

4. What is the typical output signal of the probe?
   The output is a voltage proportional to shaft displacement, typically 0–20 V peak-to-peak.

5. Is additional electromagnetic shielding required in high-noise environments?
   No, the probe’s integrated EMI shielding ensures stable and reliable performance.

6. Can the probe be used in pressurized or oil-submerged environments?
   Yes, it is pressure-rated up to 500 psi and suitable for submerged or pressurized installations.

7. How does the probe maintain accuracy across wide temperature ranges?
   Stainless-steel construction and internal thermal compensation ensure precise measurements under varying temperatures.

8. Is this probe capable of monitoring both radial and axial displacement?
   Yes, the installation orientation determines whether radial or axial vibration is measured.

9. What signal conditioning equipment is recommended for optimal operation?
   A Bently Nevada 3300 XL Proximitor or equivalent driver supplies power and processes the signal.

10. Does the extension cable length affect calibration or sensitivity?
    Yes, each probe is calibrated for a specific cable length, so using the correct matching extension cable is essential.

Recommended Related Models (Same Series or Similar)

Popular Bently Nevada Models

FAQ

1. How is the 330905-12-22-05-02-05 probe calibrated to maintain measurement accuracy?
   Each probe is factory-calibrated using an AISI 4140 steel target to ensure precise sensitivity and linearity.

2. Can this probe interface with different Bently Nevada Proximitor drivers?
   Yes, it integrates seamlessly with the 3300 XL Proximitor and approved NSv extension cables.

3. What is the maximum vibration frequency range measurable by this probe?
   It can detect vibration signals up to 10 kHz within its specified linear range.

4. What is the typical output signal of the probe?
   The output is a voltage proportional to shaft displacement, typically 0–20 V peak-to-peak.

5. Is additional electromagnetic shielding required in high-noise environments?
   No, the probe’s integrated EMI shielding ensures stable and reliable performance.

6. Can the probe be used in pressurized or oil-submerged environments?
   Yes, it is pressure-rated up to 500 psi and suitable for submerged or pressurized installations.

7. How does the probe maintain accuracy across wide temperature ranges?
   Stainless-steel construction and internal thermal compensation ensure precise measurements under varying temperatures.

8. Is this probe capable of monitoring both radial and axial displacement?
   Yes, the installation orientation determines whether radial or axial vibration is measured.

9. What signal conditioning equipment is recommended for optimal operation?
   A Bently Nevada 3300 XL Proximitor or equivalent driver supplies power and processes the signal.

10. Does the extension cable length affect calibration or sensitivity?
    Yes, each probe is calibrated for a specific cable length, so using the correct matching extension cable is essential.

Recommended Related Models (Same Series or Similar)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.