Excellent PLC
Product Introduction
The Epro PR6424/017-000 Eddy-Current Sensor is part of the PR6424 series, engineered to deliver highly accurate and stable measurements of shaft displacement and vibration in rotating machinery. With a sensor head diameter of 16 mm, it provides robust performance in industrial environments where precise condition monitoring is essential. Its non-contact measurement capability ensures reliable operation under demanding conditions, making it a trusted component in predictive maintenance and machinery protection systems.
Technical Parameters
| Parameter | Value |
|---|---|
| Sensor Type | Eddy-Current Displacement Sensor |
| Sensor Head Diameter | 16 mm |
| Model Number | PR6424/017-000 |
| Measurement Range | ±2 mm (typical) |
| Sensitivity | 8 mV/μm (standard calibration) |
| Linearity | ≤ ±1% of full-scale |
| Operating Temperature | -35 °C to +180 °C |
| Frequency Response | Up to 10 kHz |
| Weight | 0.2 kg |
| Cable Type | Integrated coaxial cable |
| Compatible Proximitor | Epro CON011 / CON021 |
| Mounting | Threaded housing |
Product Applications
-
Steam and gas turbines for shaft vibration and displacement measurement.
-
Compressors and pumps for dynamic monitoring and protection.
-
Industrial motors and generators for predictive maintenance.
-
Petrochemical and refinery equipment for continuous condition monitoring.
-
Power plants and critical process industries where downtime prevention is essential.
Product Advantages
-
Non-contact measurement ensures long-term durability and minimal wear.
-
High sensitivity and linearity for accurate detection of shaft vibration.
-
Wide temperature range supports operation in harsh environments.
-
Stable frequency response allows monitoring of fast shaft dynamics.
-
Compatibility with Epro proximitor units ensures system flexibility.
-
Robust design resists industrial noise, oil, and other harsh conditions.
FAQ
Q1: What is the standard sensitivity of the PR6424/017-000 sensor?
A1: The standard sensitivity is 8 mV/μm, calibrated for shaft vibration measurement.
Q2: Which proximitor modules are compatible with this sensor?
A2: It is fully compatible with Epro CON011 and CON021 proximitor units.
Q3: What is the typical frequency response range?
A3: The sensor supports up to 10 kHz, suitable for high-speed rotating machinery.
Q4: How does the sensor handle electromagnetic interference?
A4: The integrated coaxial cable and shielded design minimize external noise influence.
Q5: Can the sensor operate in high-temperature conditions?
A5: Yes, it operates reliably between -35 °C and +180 °C.
Q6: What type of signal output does the sensor provide?
A6: It outputs a linear voltage signal proportional to displacement.
Q7: Is calibration required for each installation?
A7: Factory calibration ensures accuracy, but system-level calibration is recommended.
Q8: Can it be used for both radial and axial displacement measurement?
A8: Yes, it supports both axial and radial vibration monitoring depending on installation.
Q9: What is the linearity specification of this model?
A9: The linearity is typically within ±1% of the full-scale measurement range.
Q10: How is the sensor typically mounted on machinery?
A10: It uses a threaded housing for secure and precise installation near the shaft.
Same Series or Related Models
| Model Number | Sensor Head Diameter | Measurement Range | Operating Temperature |
|---|---|---|---|
| PR6424/016-121 | 16 mm | ±2 mm | -35 °C to +180 °C |
| PR6424/017-021 | 16 mm | ±2 mm | -35 °C to +180 °C |
| PR6424/018-000 | 16 mm | ±2 mm | -35 °C to +180 °C |
| PR6423/002-030 | 8 mm | ±1 mm | -35 °C to +180 °C |
| PR6423/005-031 | 8 mm | ±1 mm | -35 °C to +180 °C |
| PR6426/010-000 | 25 mm | ±4 mm | -35 °C to +180 °C |
Popular Models from the Same Brand
| Model Number | Type | Sensor Head Diameter | Measurement Range | Weight |
|---|---|---|---|---|
| PR6424/016-121 | Eddy-Current Sensor | 16 mm | ±2 mm | 0.2 kg |
| PR6424/017-021 | Eddy-Current Sensor | 16 mm | ±2 mm | 0.2 kg |
| PR6424/018-000 | Eddy-Current Sensor | 16 mm | ±2 mm | 0.2 kg |
| PR6423/002-030 | Eddy-Current Sensor | 8 mm | ±1 mm | 0.15 kg |
| PR6423/005-031 | Eddy-Current Sensor | 8 mm | ±1 mm | 0.15 kg |
| PR6426/010-000 | Eddy-Current Sensor | 25 mm | ±4 mm | 0.3 kg |
| PR9268/203-000 | Vibration Transducer | N/A | N/A | 0.25 kg |
| CON021 | Proximitor Signal Conditioner | N/A | N/A | 0.4 kg |
