Excellent PLC
Product Introduction
The Epro PR6424/016-000 Eddy-Current Sensor is a precision 16 mm probe designed for vibration and displacement monitoring in industrial rotating machinery. Built for high reliability in demanding environments, it is commonly used in turbines, compressors, pumps, and critical process equipment where accurate shaft vibration and position measurements are essential.
This sensor integrates seamlessly with Epro signal conditioners and monitoring systems, providing accurate, stable, and noise-resistant measurements. Its rugged design ensures reliable operation in harsh conditions such as high temperatures, oil-lubricated environments, and high electromagnetic interference areas.
Technical Specifications
| Parameter | Value |
|---|---|
| Sensor Type | Eddy-Current Proximity Probe |
| Sensor Head Diameter | 16 mm |
| Weight | 0.2 kg |
| Measuring Range | Typically up to 2 mm (depending on system configuration) |
| Frequency Response | DC to 10 kHz |
| Sensitivity | 8 mV/µm (standard, system dependent) |
| Linearity | ≤ ±1% of full-scale |
| Operating Temperature | -35 °C to +180 °C (probe) |
| Connection Type | Coaxial cable with high shielding |
| Compatible Drivers | Epro PR6426, PR6423, or VM600 monitoring systems |
Product Applications
-
Turbomachinery: Shaft vibration and axial displacement measurement for turbines and compressors.
-
Pumps and Motors: Continuous monitoring of shaft vibration to prevent catastrophic failures.
-
Gearboxes: Detecting misalignment, imbalance, and gear mesh anomalies.
-
Generators: Monitoring shaft movement and bearing health.
-
Industrial Compressors: Ensuring reliable operation by detecting early mechanical issues.
-
Condition Monitoring Systems: Integration into Epro and other OEM monitoring platforms for predictive maintenance.
Product Advantages
-
High Precision: Provides accurate displacement and vibration readings for critical rotating machinery.
-
Rugged Design: Resistant to oil, dust, high temperature, and electromagnetic interference.
-
System Compatibility: Fully compatible with Epro monitoring systems, ensuring seamless integration.
-
Long-Term Reliability: Proven durability in continuous industrial operation.
-
Wide Application Range: Suitable for power generation, petrochemical, and heavy machinery industries.
-
Noise Resistance: High shielding minimizes signal distortion from external electrical noise.
FAQ
Q1: What is the frequency response range of the PR6424/016-000 sensor?
A1: The sensor supports a frequency response from DC up to approximately 10 kHz, depending on the driver used.
Q2: Can the sensor be used in high-temperature environments?
A2: Yes, the probe is designed to withstand operating temperatures from -35 °C to +180 °C.
Q3: What type of output does the sensor provide?
A3: It delivers an analog voltage output proportional to the displacement of the target.
Q4: Is the PR6424/016-000 compatible with other Epro signal conditioners?
A4: Yes, it works with drivers such as PR6426 and PR6423, and integrates with VM600 monitoring systems.
Q5: How does the sensor handle electromagnetic interference (EMI)?
A5: It uses a coaxial cable with high shielding to minimize signal noise from external EMI sources.
Q6: Can this sensor be installed in oil-lubricated bearing housings?
A6: Yes, it is specifically designed for such environments, ensuring stable performance.
Q7: What is the typical sensitivity of the sensor?
A7: The standard sensitivity is around 8 mV/µm, depending on system configuration.
Q8: Does the sensor require calibration after installation?
A8: Calibration is generally done at the system level with the driver, not at the probe itself.
Q9: Can this sensor detect both radial and axial displacement?
A9: Yes, depending on installation orientation, it can monitor either radial vibration or axial movement.
Q10: How is the sensor connected to the monitoring system?
A10: It connects via a shielded coaxial cable directly to a driver module, which conditions the signal for monitoring equipment.
Same Series or Related Models
| Model | Description |
|---|---|
| PR6424/015-000 | 8 mm Eddy-Current Sensor |
| PR6424/016-121 | 16 mm Eddy-Current Sensor (variant) |
| PR6424/017-000 | 16 mm Eddy-Current Sensor, extended type |
| PR6423/010-000 | 5 mm Eddy-Current Probe |
| PR6426/010-000 | Eddy-Current Sensor Driver |
| PR6424/018-000 | High-temperature Eddy-Current Sensor |
Popular Models from the Same Brand
| Model | Description |
|---|---|
| PR6424/000-000 | Standard Eddy-Current Probe |
| PR6426/000-000 | Proximity Sensor Driver |
| PR6423/000-000 | Small Diameter Eddy-Current Probe |
| MMS6000 | Machinery Monitoring System |
| VM600 | Vibration Monitoring and Protection System |
| PR9200 | Accelerometer for vibration monitoring |
| PR9268/203-000 | Speed and Phase Reference Sensor |
| PR6424/020-000 | High-performance Eddy-Current Probe |
