Excellent PLC
Product Introduction
The Epro PR6424/007-100 16mm Eddy-Current Sensor is a precision probe designed for non-contact displacement and vibration measurement. It is widely used in rotating machinery monitoring systems where reliability, accuracy, and stability are essential. The sensor is part of the renowned PR6424 series, developed for long-term use in demanding industrial environments. With its robust design and compatibility with monitoring systems such as the Epro CON series, it ensures continuous condition monitoring of critical assets such as turbines, compressors, pumps, and generators.
Technical Parameters
| Parameter | Value |
|---|---|
| Model | PR6424/007-100 |
| Sensor Type | Eddy-Current Displacement/Vibration |
| Sensor Head Diameter | 16mm |
| Measuring Range | 0.25 mm to 2.0 mm (typical) |
| Linear Range | ±1.0 mm around nominal gap |
| Frequency Response | Up to 10 kHz |
| Operating Temperature Range | -35 °C to +180 °C |
| Storage Temperature Range | -40 °C to +200 °C |
| Weight | 0.2 kg |
| Output Signal | Proportional voltage signal (with driver) |
| Material | Stainless steel probe body |
| Connection Type | Coaxial cable with rugged connector |
Product Applications
-
Turbomachinery Monitoring: Measurement of shaft vibration and displacement in gas turbines, steam turbines, and hydro turbines.
-
Compressor Systems: Ensures accurate detection of rotor dynamic behavior.
-
Pumps and Fans: Condition monitoring for balance, shaft position, and early fault detection.
-
Generators and Motors: Shaft orbit and vibration monitoring for predictive maintenance.
-
Industrial Process Plants: Integration into machinery protection systems for safety and operational efficiency.
Product Advantages
-
High Precision: Delivers accurate non-contact measurement of displacement and vibration.
-
Robust Design: Stainless steel housing ensures durability in harsh industrial conditions.
-
Wide Temperature Range: Operates effectively in environments up to +180 °C.
-
System Compatibility: Fully compatible with Epro CON041/CON051 drivers and monitoring systems.
-
Maintenance-Free: No physical contact with the rotating shaft reduces wear and extends service reliability.
-
Trusted for Critical Assets: Commonly deployed in high-value rotating equipment where downtime is costly.
FAQ
Q1: What type of signal does the PR6424/007-100 sensor deliver?
A1: It provides a voltage signal proportional to shaft displacement when connected to a compatible driver such as CON041 or CON051.
Q2: Can the sensor be used for both displacement and vibration monitoring?
A2: Yes, it is designed for both shaft displacement and relative vibration measurements.
Q3: What is the maximum frequency response supported by this sensor?
A3: The sensor supports a frequency response up to approximately 10 kHz.
Q4: Is this sensor suitable for use in high-temperature machinery environments?
A4: Yes, it can operate continuously in temperatures up to +180 °C.
Q5: Which monitoring systems are compatible with the PR6424/007-100?
A5: It is fully compatible with Epro CON041, CON051, and related monitoring modules.
Q6: What type of cable connection is provided with the sensor?
A6: It uses a coaxial cable with a rugged industrial-grade connector for stable signal transmission.
Q7: Can this sensor be applied in hazardous areas?
A7: Yes, when paired with the proper certified drivers and barriers, it is suitable for hazardous area applications.
Q8: How does the linear range of the sensor affect measurement accuracy?
A8: The linear range of ±1.0 mm ensures stable and accurate readings around the nominal gap.
Q9: What role does material selection play in the sensor’s durability?
A9: The stainless steel probe body provides corrosion resistance and long operational life in harsh conditions.
Q10: Can the sensor be used for orbit analysis of rotating shafts?
A10: Yes, it is widely used in orbit and shaft trajectory monitoring to detect instability and misalignment.
Recommended Same-Series or Related Models
| Model | Description |
|---|---|
| PR6424/007-000 | 8 mm eddy-current sensor, general-purpose |
| PR6424/007-010 | 8 mm sensor with extended temperature range |
| PR6424/007-030 | 8 mm sensor with alternative connector type |
| PR6424/007-101 | 8 mm sensor with enhanced calibration |
| PR6424/009-000 | 8 mm sensor variant for high-precision tasks |
| PR6424/009-101 | 8 mm sensor variant with improved shielding |
Popular Models from the Same Brand
| Model | Description |
|---|---|
| PR6423/002-030 | 5 mm eddy-current sensor for compact installations |
| PR6423/010-000 | 5 mm sensor for standard turbine monitoring |
| PR6424/008-100 | 8 mm sensor for medium-range displacement |
| PR6424/009-000 | 8 mm sensor for high-accuracy vibration detection |
| PR9268/203-000 | Vibration transducer for heavy-duty applications |
| CON041 | Eddy-current probe driver for PR642x series |
| CON051 | Advanced driver module for condition monitoring |
| MMS6835 | Monitoring system module for turbomachinery |
