Bently Nevada 190501-12-99-00 Velomitor CT Velocity Transducer

Product Introduction

The Bently Nevada 190501-12-99-00 Velomitor CT Velocity Transducer is an advanced sensor designed for monitoring the vibration velocity of rotating machinery. It is part of Bently Nevada’s trusted Velomitor series, known for providing precise, reliable vibration data in demanding industrial environments. The 190501-12-99-00 model is commonly used in predictive maintenance systems and machine condition monitoring applications, ensuring early fault detection to prevent costly equipment failures.

This transducer converts mechanical vibration into an electrical signal proportional to the velocity, allowing real-time monitoring of machine health. Its rugged design ensures superior performance under harsh conditions such as high temperatures, high vibration, and contaminated environments. The Velomitor CT model is typically installed on bearing housings or other structural components of rotating machines for continuous condition assessment.

Product Specifications

Product Applications

The Velomitor CT 190501-12-99-00 is widely used in industrial vibration monitoring systems where accurate velocity measurement is critical for machinery health. Common applications include:

• Pumps and Compressors – Detecting misalignment, imbalance, or bearing wear.

• Fans and Blowers – Monitoring vibration to prevent structural failures.

• Gearboxes – Identifying gear tooth damage or shaft issues.

• Electric Motors – Tracking early-stage bearing faults and rotor problems.

• Industrial Turbomachinery – Ensuring stable operation through vibration analysis.

• Process Equipment – Supporting predictive maintenance in chemical and power plants.

Product Advantages

• High Accuracy: Delivers precise velocity measurements with minimal error.

• Wide Frequency Range: Covers low to high frequencies for diverse machinery types.

• Rugged Design: Stainless steel construction for durability in harsh environments.

• Compact Size: Easy integration into existing monitoring systems.

• High Shock Resistance: Withstands up to 5000 g for tough industrial conditions.

• Compatibility: Works seamlessly with Bently Nevada condition monitoring systems.

• Stable Performance: Maintains accuracy across wide temperature and humidity ranges.

• Simplified Installation: Stud mounting ensures secure and quick installation.

FAQ

1. What type of sensing technology is used in the Velomitor CT transducer?
   It uses piezoelectric sensing with integrated electronics for signal conditioning.

2. What is the frequency range supported by this transducer?
   The operational frequency range is 4 Hz to 5 kHz.

3. What is the output type of the transducer?
   It provides a voltage output proportional to vibration velocity.

4. Does the transducer require external signal conditioning?
   No, it has built-in signal conditioning for direct connection to monitoring systems.

5. What is the typical sensitivity of the transducer?
   The sensitivity is 100 mV/in/s (±5%).

6. Can this transducer operate in hazardous environments?
   Yes, it meets ATEX and IECEx certifications for hazardous areas.

7. What is the shock resistance capability?
   It can withstand up to 5000 g peak shock loads.

8. Does it require a specific power supply?
   Yes, it operates with an 18 to 24 VDC supply voltage.

9. Can the transducer be mounted in any orientation?
   Yes, but vertical mounting typically provides the best performance.

10. Is the transducer compatible with Bently Nevada’s 3500 monitoring systems?
    Yes, it integrates seamlessly with Bently Nevada 3500 and 1900 series monitors.

Recommended Related Models (Same Series)

Popular Models from Bently Nevada

FAQ

1. What type of sensing technology is used in the Velomitor CT transducer?
   It uses piezoelectric sensing with integrated electronics for signal conditioning.

2. What is the frequency range supported by this transducer?
   The operational frequency range is 4 Hz to 5 kHz.

3. What is the output type of the transducer?
   It provides a voltage output proportional to vibration velocity.

4. Does the transducer require external signal conditioning?
   No, it has built-in signal conditioning for direct connection to monitoring systems.

5. What is the typical sensitivity of the transducer?
   The sensitivity is 100 mV/in/s (±5%).

6. Can this transducer operate in hazardous environments?
   Yes, it meets ATEX and IECEx certifications for hazardous areas.

7. What is the shock resistance capability?
   It can withstand up to 5000 g peak shock loads.

8. Does it require a specific power supply?
   Yes, it operates with an 18 to 24 VDC supply voltage.

9. Can the transducer be mounted in any orientation?
   Yes, but vertical mounting typically provides the best performance.

10. Is the transducer compatible with Bently Nevada’s 3500 monitoring systems?
    Yes, it integrates seamlessly with Bently Nevada 3500 and 1900 series monitors.

Recommended Related Models (Same Series)

Popular Models from Bently Nevada

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.