Company Information
E-mail		[email protected]
Mobile		+8613666084105
Whatsapp		+8613666084105
WeChat		13666084105
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330101-00-14-10-02-00 is a high-precision 8mm proximity probe from the 3300 XL series, designed for non-contact measurement of shaft position and vibration in rotating machinery. Utilizing eddy-current technology, this probe provides accurate displacement measurements, making it an essential component in machinery protection and condition monitoring systems.

---

Product Specifications

---

Product Applications

The 330101-00-14-10-02-00 proximity probe is widely used in various industries for:

• Rotating Machinery Monitoring: Measuring shaft vibration and position in turbines, compressors, and motors.

• Bearing Wear Detection: Monitoring axial and radial displacement to detect bearing degradation.

• Shaft Alignment: Ensuring proper alignment in coupled machinery.

• Vibration Analysis: Providing data for predictive maintenance and machinery diagnostics.

• Process Control: Integrating with control systems for real-time monitoring and protection.

---

Product Advantages

• High Precision: Delivers accurate measurements essential for machinery protection.

• Robust Construction: Stainless steel housing and PPS probe tip ensure durability in harsh environments.

• Ease of Installation: ClickLoc™ connectors allow for secure and straightforward connections without special tools.

• Compatibility: Fully compatible with Bently Nevada’s 3300 XL series systems, ensuring seamless integration.

• Environmental Resilience: IP67 rating and wide temperature range make it suitable for challenging industrial conditions.

---

Frequently Asked Questions (FAQ)

1. Q: What does the part number 330101-00-14-10-02-00 signify?
   A: It indicates a 3300 XL 8mm proximity probe with specific configurations: 1.4-inch case length, 1.0-meter cable, ClickLoc™ connector, and no agency approvals.

2. Q: Is this probe compatible with other Bently Nevada systems?
   A: Yes, it’s designed for use with Bently Nevada’s 3300 XL series, including Proximitor® sensors and extension cables.

3. Q: Can this probe operate in high-temperature environments?
   A: Yes, it operates reliably within a temperature range of -51°C to +177°C (-60°F to +351°F).

4. Q: What is the environmental protection rating of this probe?
   A: It has an IP67 rating, making it dust-tight and water-resistant.

5. Q: What materials are used in the construction of the probe?
   A: The probe housing is made of stainless steel, and the tip is constructed from polyphenylene sulfide (PPS).

6. Q: What is the weight of the probe?
   A: The probe weighs 0.323 kg (0.712 lbs).

7. Q: What is the purpose of the ClickLoc™ connector?
   A: The ClickLoc™ connector ensures a secure, reliable connection that resists loosening due to vibration.

8. Q: Is the probe suitable for measuring both axial and radial displacement?
   A: Yes, it can measure both axial and radial displacement, depending on installation orientation.

9. Q: Does the probe require calibration?
   A: Probes are factory-calibrated for AISI 4140 steel targets. Calibration for other materials may be necessary.

10. Q: Can the probe be used in hazardous environments?
    A: This specific model does not have agency approvals for hazardous environments. Models with such approvals are available.

---

Recommended Related Models (Same Series or Functionality)

Popular Bently Nevada Models (Same Brand)

Frequently Asked Questions (FAQ)

1. Q: What does the part number 330101-00-14-10-02-00 signify?
   A: It indicates a 3300 XL 8mm proximity probe with specific configurations: 1.4-inch case length, 1.0-meter cable, ClickLoc™ connector, and no agency approvals.

2. Q: Is this probe compatible with other Bently Nevada systems?
   A: Yes, it’s designed for use with Bently Nevada’s 3300 XL series, including Proximitor® sensors and extension cables.

3. Q: Can this probe operate in high-temperature environments?
   A: Yes, it operates reliably within a temperature range of -51°C to +177°C (-60°F to +351°F).

4. Q: What is the environmental protection rating of this probe?
   A: It has an IP67 rating, making it dust-tight and water-resistant.

5. Q: What materials are used in the construction of the probe?
   A: The probe housing is made of stainless steel, and the tip is constructed from polyphenylene sulfide (PPS).

6. Q: What is the weight of the probe?
   A: The probe weighs 0.323 kg (0.712 lbs).

7. Q: What is the purpose of the ClickLoc™ connector?
   A: The ClickLoc™ connector ensures a secure, reliable connection that resists loosening due to vibration.

8. Q: Is the probe suitable for measuring both axial and radial displacement?
   A: Yes, it can measure both axial and radial displacement, depending on installation orientation.

9. Q: Does the probe require calibration?
   A: Probes are factory-calibrated for AISI 4140 steel targets. Calibration for other materials may be necessary.

10. Q: Can the probe be used in hazardous environments?
    A: This specific model does not have agency approvals for hazardous environments. Models with such approvals are available.

Recommended Related Models (Same Series or Functionality)

Popular Bently Nevada Models (Same Brand)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.