Bently Nevada 330101-0024-01-0205 3300 XL 8mm Proximity Probes

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330101-0024-01-0205 3300 XL 8mm Proximity Probe is an advanced, high-precision vibration and position measurement sensor designed for industrial rotating machinery monitoring. It is a key component of the 3300 XL Proximity Transducer System, which has become the global standard in machinery protection and condition monitoring.

This model features an 8 mm probe tip that delivers accurate displacement measurements for shaft vibration, thrust position, and rotational dynamics in critical equipment such as turbines, compressors, motors, and pumps. Built to meet API 670 standards, the 330101-0024-01-0205 offers exceptional performance, stability, and reliability even in the most demanding industrial environments.

The probe incorporates a robust stainless-steel housing and a durable PPS (polyphenylene sulfide) tip, providing excellent resistance to corrosion, oil, and mechanical wear. Combined with a low-noise, shielded coaxial cable and superior EMI immunity, it ensures consistent signal quality and precise data output.

---

Product Parameters

---

Product Applications

The Bently Nevada 330101-0024-01-0205 proximity probe is specifically engineered for use in machinery protection and performance monitoring systems. It measures both dynamic vibration and static shaft position, providing critical data for predictive maintenance and real-time protection.

Typical applications include:

• Steam and Gas Turbines – For radial vibration and axial thrust position measurements.

• Compressors – Detecting imbalance, misalignment, and mechanical looseness.

• Motors and Generators – Monitoring shaft displacement, eccentricity, and bearing conditions.

• Pumps and Fans – Detecting mechanical faults to prevent catastrophic equipment failures.

• Gearboxes and Transmission Systems – Monitoring gear mesh behavior and shaft alignment.

• Industrial Condition Monitoring Systems – Used in integrated plant diagnostics and vibration analysis networks.

This probe’s stable performance and reliability make it suitable for continuous operation in high-temperature, high-vibration, and high-contaminant environments.

---

Product Advantages

• Exceptional Accuracy and Repeatability
  Provides consistent, linear, and precise vibration and displacement measurements under various operational conditions.

• Superior Environmental Durability
  Resistant to oil, dust, vibration, and moisture with IP67-rated construction, ensuring long-term stability.

• Advanced Electromagnetic Shielding
  Coaxial shield design minimizes EMI and ensures clean, interference-free signals in electrically noisy environments.

• Extended Temperature Range
  Performs reliably in extreme industrial temperatures from -35°C to +177°C.

• API 670 Compliance
  Meets industry standards for machinery protection and monitoring systems.

• Rugged and Corrosion-Resistant Design
  Stainless-steel housing with reinforced PPS tip provides durability and resistance to harsh chemicals and fluids.

• Ease of Integration
  Compatible with all Bently Nevada 3300 XL Proximitor sensors and system components.

• Proven System Reliability
  Part of the globally recognized 3300 XL platform, trusted across power, oil & gas, and process industries.

---

FAQ

1. What system is the 330101-0024-01-0205 proximity probe designed for?
   It is part of the Bently Nevada 3300 XL Proximity Transducer System.

2. What is the sensitivity rating of this probe?
   The probe has a sensitivity of 7.87 V/mm (200 mV/mil).

3. Can this probe measure both vibration and position?
   Yes, it measures dynamic shaft vibration and static shaft position simultaneously.

4. What is the typical linear measurement range?
   The nominal linear range is 2.0 mm (80 mils).

5. Is it compatible with older 3300 series systems?
   Yes, when used with compatible Proximitor sensors, it is backward-compatible.

6. How does the probe ensure immunity from electrical interference?
   It employs a shielded coaxial design that minimizes electromagnetic interference.

7. What type of materials are used for the probe housing and tip?
   The probe housing is made of stainless steel, while the tip is constructed from PPS for durability.

8. Can the probe operate in high-vibration environments?
   Yes, it withstands up to 20 g (196 m/s²) of vibration without signal distortion.

9. Does this probe require on-site calibration?
   No recalibration is required when paired with a matching 3300 XL Proximitor sensor, but periodic verification is recommended.

10. What standard does the probe comply with for machinery protection?
    It is fully compliant with API 670 standards.

---

Recommended Related Models (Same Series)

---

Recommended Popular Models (Same Brand)

FAQ

1. What system is the 330101-0024-01-0205 proximity probe designed for?
   It is part of the Bently Nevada 3300 XL Proximity Transducer System.

2. What is the sensitivity rating of this probe?
   The probe has a sensitivity of 7.87 V/mm (200 mV/mil).

3. Can this probe measure both vibration and position?
   Yes, it measures dynamic shaft vibration and static shaft position simultaneously.

4. What is the typical linear measurement range?
   The nominal linear range is 2.0 mm (80 mils).

5. Is it compatible with older 3300 series systems?
   Yes, when used with compatible Proximitor sensors, it is backward-compatible.

6. How does the probe ensure immunity from electrical interference?
   It employs a shielded coaxial design that minimizes electromagnetic interference.

7. What type of materials are used for the probe housing and tip?
   The probe housing is made of stainless steel, while the tip is constructed from PPS for durability.

8. Can the probe operate in high-vibration environments?
   Yes, it withstands up to 20 g (196 m/s²) of vibration without signal distortion.

9. Does this probe require on-site calibration?
   No recalibration is required when paired with a matching 3300 XL Proximitor sensor, but periodic verification is recommended.

10. What standard does the probe comply with for machinery protection?
    It is fully compliant with API 670 standards.

Recommended Related Models (Same Series)

---

Recommended Popular Models (Same Brand)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.