Bently Nevada 330101-05-30-10-02-00 3300 XL 8mm Proximity Probes

Product Introduction

The Bently Nevada 330101-05-30-10-02-00 is part of the renowned 3300 XL 8mm Proximity Transducer System by GE’s Bently Nevada, designed for continuous machinery condition monitoring and protection. This probe delivers highly accurate, non-contact measurements of shaft displacement, vibration, and position. It is used extensively in rotating machinery such as turbines, compressors, pumps, and motors.

As a part of the 3300 XL series, this model features an 8mm probe tip, rugged design, and superior immunity to electrical noise and environmental factors. It is tailored for harsh industrial environments and ensures long-term reliability in critical applications.

The 330101 probe connects with matching extension cables and Proximitor® sensor drivers to form a complete transducer system. This ensures the highest level of accuracy and compatibility with Bently Nevada’s monitoring systems like the 3500 series.

Product Specifications

Applications

The Bently Nevada 330101-05-30-10-02-00 proximity probe is widely deployed in critical rotating machinery where precise shaft positioning or vibration monitoring is essential for system health and protection. Key application sectors include:

• Steam and Gas Turbines: Used for monitoring rotor dynamics, shaft displacement, and thrust position.

• Compressors (Centrifugal, Axial, Reciprocating): Vibration monitoring and rotor positioning in oil & gas or petrochemical plants.

• Motors and Generators: Detects shaft misalignment, imbalance, and excessive vibration.

• Industrial Pumps: Prevents failures by early detection of cavitation or mechanical wear.

• Gearboxes and Fans: Ensures performance reliability in rotating equipment under continuous operation.

• Nuclear and Thermal Power Plants: Integrates into protection systems to comply with critical reliability standards.

Product Advantages

• Highly Accurate Measurements: Designed to deliver precise shaft position and vibration data with minimal signal drift.

• Robust Environmental Resistance: Operates reliably in extreme temperatures, high pressure, and corrosive environments.

• Long-Term Stability: Built for continuous, 24/7 monitoring with minimal maintenance needs.

• Secure Locking Mechanism: Features ClickLoc™ connectors that resist accidental disconnection due to vibration.

• Global Certifications: Complies with international safety standards, including ATEX and CSA.

• Modular System Design: Interchangeable with other 3300 XL components (probes, cables, sensors).

• Backward Compatibility: Supports integration with older Bently Nevada systems without recalibration.

Frequently Asked Questions (FAQ)

1. What does the 330101-05-30-10-02-00 proximity probe do?
   It measures the distance between the probe tip and a rotating shaft to monitor vibration, displacement, or position in real time.

2. Is the probe suitable for high-temperature environments?
   Yes, it supports operating temperatures up to +175°C and storage up to +177°C.

3. Can I use this probe with older Bently Nevada systems?
   Yes, the 3300 XL 8mm series is backward-compatible with many older Proximitor® drivers and monitoring setups.

4. What is the measurement range of this probe?
   The linear measurement range is ±1 mm, with a total measurable displacement of 2 mm.

5. Can this probe be used in turbine startup monitoring and overspeed protection systems?
   Absolutely. It is widely used for shaft radial vibration, axial position, and rotor speed sensing, all critical parameters during turbine startup and trip conditions.

6. How are the probe and cable connected?
   Through molded ClickLoc™ connectors that provide secure and sealed connections.

7. What is the expected service life of the probe?
   When properly installed and maintained, these probes can last for over 10 years in continuous operation.

8. Is the probe suitable for hazardous locations?
   Yes, it is certified for hazardous areas with CSA, ATEX, and IECEx approvals.

9. Can this probe be mounted in reverse orientation?
   Yes, this model supports reverse mounting configurations for space-constrained installations.

10. Does it require recalibration over time?
    No recalibration is typically needed unless the probe is moved or replaced; system accuracy remains stable over time.

Related Models from the Same 3300 XL Series

Popular Bently Nevada Models Across Industrial Monitoring

Frequently Asked Questions (FAQ)

1. What does the 330101-05-30-10-02-00 proximity probe do?
   It measures the distance between the probe tip and a rotating shaft to monitor vibration, displacement, or position in real time.

2. Is the probe suitable for high-temperature environments?
   Yes, it supports operating temperatures up to +175°C and storage up to +177°C.

3. Can I use this probe with older Bently Nevada systems?
   Yes, the 3300 XL 8mm series is backward-compatible with many older Proximitor® drivers and monitoring setups.

4. What is the measurement range of this probe?
   The linear measurement range is ±1 mm, with a total measurable displacement of 2 mm.

5. Can this probe be used in turbine startup monitoring and overspeed protection systems?
   Absolutely. It is widely used for shaft radial vibration, axial position, and rotor speed sensing, all critical parameters during turbine startup and trip conditions.

6. How are the probe and cable connected?
   Through molded ClickLoc™ connectors that provide secure and sealed connections.

7. What is the expected service life of the probe?
   When properly installed and maintained, these probes can last for over 10 years in continuous operation.

8. Is the probe suitable for hazardous locations?
   Yes, it is certified for hazardous areas with CSA, ATEX, and IECEx approvals.

9. Can this probe be mounted in reverse orientation?
   Yes, this model supports reverse mounting configurations for space-constrained installations.

10. Does it require recalibration over time?
    No recalibration is typically needed unless the probe is moved or replaced; system accuracy remains stable over time.

Related Models from the Same 3300 XL Series

Popular Bently Nevada Models Across Industrial Monitoring

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.