Bently Nevada 330103-00-08-10-02-05 3300 XL 8mm Proximity Probes

Product Introduction

The Bently Nevada 330103-00-08-10-02-05 is a part of the 3300 XL 8mm Proximity Probe System, a flagship solution from Bently Nevada, renowned for its industry-standard performance in vibration monitoring and machinery protection. This probe system is designed to work in combination with a matching extension cable and Proximitor® sensor to provide precise, non-contact displacement measurements for critical rotating machinery.

Designed in compliance with API 670 standards, the 3300 XL 8mm probes offer robust performance in harsh industrial environments. These probes are primarily used for shaft vibration, axial position, and radial vibration measurements in turbines, compressors, pumps, and other high-speed rotating assets.

The model 330103-00-08-10-02-05 specifies a probe with an 8mm tip diameter, armored cable length of 8 feet, connector proximity of 10 feet, and a standard reverse mount configuration. It is widely used in oil & gas, power generation, petrochemical, and heavy machinery industries.

Technical Specifications

Applications

The Bently Nevada 330103-00-08-10-02-05 proximity probe is suitable for a wide range of industrial applications, including:

• Steam and Gas Turbines: For shaft vibration and thrust position monitoring

• Centrifugal Compressors: Used in rotor dynamics measurements and condition monitoring

• Industrial Pumps: To detect imbalance, misalignment, and bearing issues

• Motors and Generators: For real-time condition-based monitoring

• Gearboxes and Blowers: Ensures continuous performance and predictive maintenance

• Nuclear and Fossil Power Plants: As part of safety and asset integrity programs

• Oil and Gas Refineries: For API 670-compliant vibration and position monitoring

Product Advantages

• High Accuracy: Delivers consistent displacement measurements in microns or mils with minimal signal noise.

• Robust Design: Stainless steel construction and hermetically sealed body provide superior reliability in harsh environments.

• API 670 Compliance: Meets industry standards for condition monitoring and machinery protection.

• Interchangeability: Fully compatible with other 3300 XL series components, ensuring ease of maintenance and upgrades.

• Wide Operating Temperature Range: Ideal for both low and high-temperature industrial environments.

• Shielded Cable Assembly: Reduces electromagnetic interference (EMI) and radio frequency interference (RFI).

• Custom Configurations Available: Cable length and mounting thread options support flexible installations.

Frequently Asked Questions (FAQ)

1. What does the part number 330103-00-08-10-02-05 signify?

   • It indicates a Bently Nevada 3300 XL 8mm probe with extension total length (1 meter), and connector/mounting configuration.

2. Is this proximity probe API 670 compliant?

   • Yes, it is designed to fully comply with API 670 standards for machinery protection systems.

3. Can this probe be used in high-vibration environments?

   • Absolutely. The probe is specifically engineered for high-vibration and high-temperature environments like turbines and compressors.

4. What type of measurements does it support?

   • It supports displacement, vibration (radial and axial), and phase reference measurements.

5. Does the product require a matching extension cable and Proximitor® sensor?

   • Yes. For proper operation, the probe should be used with its designated extension cable and Proximitor® sensor.

6. What is the typical service life of the probe?

   • When installed correctly, the probe can last several years in continuous operation, subject to environmental conditions.

7. Can I replace only the probe if it is damaged?

   • Yes. Bently Nevada components are modular, allowing individual replacement of probe, cable, or sensor.

8. How should the probe be mounted?

   • This model uses a reverse mount with a 3/8-24 UNF-2A thread, and should be installed per OEM torque specifications.

9. Is the cable armored?

   • Yes, the cable is armored for additional mechanical protection against abrasion and wear.

10. Is this product compatible with other Bently Nevada systems?

• Yes, it is compatible with most Bently Nevada monitoring systems, especially those supporting 3300 XL 8mm probes.

Related Models (Same Series)

Popular Bently Nevada Models

Frequently Asked Questions (FAQ)

1. What does the part number 330103-00-08-10-02-05 signify?

   • It indicates a Bently Nevada 3300 XL 8mm probe with extension total length (1 meter), and connector/mounting configuration.

2. Is this proximity probe API 670 compliant?

   • Yes, it is designed to fully comply with API 670 standards for machinery protection systems.

3. Can this probe be used in high-vibration environments?

   • Absolutely. The probe is specifically engineered for high-vibration and high-temperature environments like turbines and compressors.

4. What type of measurements does it support?

   • It supports displacement, vibration (radial and axial), and phase reference measurements.

5. Does the product require a matching extension cable and Proximitor® sensor?

   • Yes. For proper operation, the probe should be used with its designated extension cable and Proximitor® sensor.

6. What is the typical service life of the probe?

   • When installed correctly, the probe can last several years in continuous operation, subject to environmental conditions.

7. Can I replace only the probe if it is damaged?

   • Yes. Bently Nevada components are modular, allowing individual replacement of probe, cable, or sensor.

8. How should the probe be mounted?

   • This model uses a reverse mount with a 3/8-24 UNF-2A thread, and should be installed per OEM torque specifications.

9. Is the cable armored?

   • Yes, the cable is armored for additional mechanical protection against abrasion and wear.

10. Is this product compatible with other Bently Nevada systems?

• Yes, it is compatible with most Bently Nevada monitoring systems, especially those supporting 3300 XL 8mm probes.

Related Models (Same Series)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.