Bently Nevada 330104-00-06-10-01-05 3300 XL 8 mm Proximity Probes

Product Introduction

The Bently Nevada 330104-00-06-10-01-05 3300 XL 8 mm Proximity Probe is an advanced vibration monitoring component designed for precision machinery protection and condition monitoring systems. It belongs to the widely used 3300 XL 8 mm proximity probe series, recognized for their stability, accuracy, and durability in harsh industrial environments. This probe is engineered to detect the relative motion and position of rotating machinery shafts, delivering critical input for predictive maintenance and machine health diagnostics. Its rugged construction, robust shielding against electromagnetic interference, and optimized design make it suitable for use in a broad range of industrial applications including turbines, compressors, motors, and pumps.

Product Parameters

Product Applications

The Bently Nevada 330104-00-06-10-01-05 probe is applied in critical rotating machinery where high precision shaft vibration and displacement measurements are essential.

• Turbomachinery: Gas and steam turbines, ensuring real-time monitoring for imbalance, misalignment, or bearing wear.

• Compressors: Protecting against excessive shaft vibration and preventing mechanical failures.

• Motors & Generators: Monitoring rotor dynamics to ensure stable operation.

• Pumps: Detecting cavitation, imbalance, and early-stage mechanical issues.

• Industrial Gearboxes: Providing diagnostic insight into gear health and shaft movement.

• Process Equipment: Supporting condition monitoring in petrochemical, power generation, and manufacturing industries.

Product Advantages

• High Accuracy: Provides precise measurements of shaft vibration and displacement.

• Reliability in Harsh Conditions: Resistant to high temperatures, electromagnetic interference, and contamination.

• Standardized API 670 Compliance: Ensures compatibility with industrial safety and protection standards.

• Durable Construction: Stainless steel body ensures long service in rugged environments.

• Wide Compatibility: Fully compatible with 3300 XL extension cables and Proximitor sensors.

• Predictive Maintenance Support: Enables early fault detection, minimizing downtime and extending equipment life.

FAQ

1. What is the typical sensitivity of the 3300 XL 8 mm probe?
   The probe typically provides a sensitivity of 200 mV/mil (7.87 mV/μm).

2. Can this probe be used with existing 3300 XL extension cables and Proximitor sensors?
   Yes, it is designed for full backward compatibility with the 3300 XL family.

3. What is the linear measurement range of this probe?
   It supports a linear range of approximately 2 mm to 4 mm depending on setup.

4. How does this probe handle electromagnetic interference?
   The probe incorporates robust shielding to minimize EMI, ensuring stable readings.

5. Is the probe compliant with API 670 standards?
   Yes, it meets API 670 requirements for machinery protection systems.

6. What is the maximum operating temperature of this probe?
   The probe can operate up to +177 °C.

7. What type of cable is used with this probe?
   It features an integral coaxial cable designed for durability and signal integrity.

8. How does this probe improve predictive maintenance strategies?
   By providing accurate vibration data, it enables early detection of imbalance, misalignment, and bearing wear.

9. Is it suitable for high-speed rotating machinery?
   Yes, its frequency response range (0–10 kHz) supports high-speed applications.

10. What mounting options are available for this probe?
    It can be mounted using M10 × 1 or 3/8″-24 UNF threaded fittings.

Recommended Related Models (Same Series)

Recommended Popular Models (Same Brand)

FAQ

1. What is the typical sensitivity of the 3300 XL 8 mm probe?
   The probe typically provides a sensitivity of 200 mV/mil (7.87 mV/μm).

2. Can this probe be used with existing 3300 XL extension cables and Proximitor sensors?
   Yes, it is designed for full backward compatibility with the 3300 XL family.

3. What is the linear measurement range of this probe?
   It supports a linear range of approximately 2 mm to 4 mm depending on setup.

4. How does this probe handle electromagnetic interference?
   The probe incorporates robust shielding to minimize EMI, ensuring stable readings.

5. Is the probe compliant with API 670 standards?
   Yes, it meets API 670 requirements for machinery protection systems.

6. What is the maximum operating temperature of this probe?
   The probe can operate up to +177 °C.

7. What type of cable is used with this probe?
   It features an integral coaxial cable designed for durability and signal integrity.

8. How does this probe improve predictive maintenance strategies?
   By providing accurate vibration data, it enables early detection of imbalance, misalignment, and bearing wear.

9. Is it suitable for high-speed rotating machinery?
   Yes, its frequency response range (0–10 kHz) supports high-speed applications.

10. What mounting options are available for this probe?
    It can be mounted using M10 × 1 or 3/8″-24 UNF threaded fittings.

Recommended Related Models (Same Series)

Recommended Popular Models (Same Brand)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.