Bently Nevada 330104-00-08-05-11-00 3300 XL 8 mm Proximity Probe

Product Introduction

The Bently Nevada 330104-00-08-05-11-00 3300 XL 8 mm Proximity Probe is a high-performance sensor designed for precise shaft vibration monitoring in industrial machinery. It is part of the 3300 XL system, which is widely recognized for its reliability and accuracy in rotating equipment diagnostics. The probe operates on eddy-current technology, offering consistent proximity measurement with minimal noise interference.

The 3300 XL series is engineered to detect early signs of machinery distress, allowing predictive maintenance that reduces unplanned downtime and extends equipment life. This particular 8 mm probe model provides exceptional sensitivity while maintaining durability in harsh industrial environments.

Product Advantages

• High measurement accuracy with repeatable proximity readings

• Excellent signal-to-noise ratio for reliable vibration monitoring

• Robust design suitable for high-temperature and high-vibration environments

• Compatible with 3300 XL monitors for integrated machine protection

• Simplifies predictive maintenance by enabling early fault detection

• Easy to install and calibrate with standard mounting options

Technical Specifications

Applications

• Monitoring high-speed rotating machinery such as turbines, compressors, and pumps

• Detecting shaft vibration and displacement in generators

• Industrial process plants including power generation, oil & gas, and petrochemicals

• Predictive maintenance programs to reduce downtime

• Integration with 3300 XL monitoring systems for comprehensive machinery protection

FAQ

1. Q: What is the recommended gap setting for the 8 mm probe?
   A: The typical operating gap is 0.127–2.54 mm (0.005–0.100 in) for optimal signal accuracy.

2. Q: Can this probe handle high-speed machinery vibrations above 20 kHz?
   A: Yes, the probe supports frequency response up to 25 kHz.

3. Q: What type of cable is compatible with this probe?
   A: The probe uses a shielded 2-wire cable designed for 3300 XL systems.

4. Q: Is the probe suitable for explosive atmospheres?
   A: This standard model is not intrinsically safe; an optional certified model is required for hazardous environments.

5. Q: How does the probe interface with the 3300 XL monitor?
   A: The probe provides differential output that connects directly to the 3300 XL module input.

6. Q: Can the probe detect axial as well as radial vibrations?
   A: The probe primarily measures radial shaft vibration; axial vibration requires additional configuration or monitoring probes.

7. Q: How is the probe calibrated?
   A: Calibration is performed using standard shunt calibration or reference gap methods in the 3300 XL system.

8. Q: Can the probe operate in high humidity or wet environments?
   A: Yes, the stainless steel housing and sealed design protect against moisture and condensation.

9. Q: Is there any signal drift over time?
   A: Properly installed 3300 XL probes show minimal signal drift; periodic validation is recommended.

10. Q: What is the maximum cable length without signal degradation?
    A: Standard configuration supports up to 11 meters; longer distances may require signal conditioning.

Recommended Same-Series or Related Models

Popular Bently Nevada Models

FAQ

1. Q: What is the recommended gap setting for the 8 mm probe?
   A: The typical operating gap is 0.127–2.54 mm (0.005–0.100 in) for optimal signal accuracy.

2. Q: Can this probe handle high-speed machinery vibrations above 20 kHz?
   A: Yes, the probe supports frequency response up to 25 kHz.

3. Q: What type of cable is compatible with this probe?
   A: The probe uses a shielded 2-wire cable designed for 3300 XL systems.

4. Q: Is the probe suitable for explosive atmospheres?
   A: This standard model is not intrinsically safe; an optional certified model is required for hazardous environments.

5. Q: How does the probe interface with the 3300 XL monitor?
   A: The probe provides differential output that connects directly to the 3300 XL module input.

6. Q: Can the probe detect axial as well as radial vibrations?
   A: The probe primarily measures radial shaft vibration; axial vibration requires additional configuration or monitoring probes.

7. Q: How is the probe calibrated?
   A: Calibration is performed using standard shunt calibration or reference gap methods in the 3300 XL system.

8. Q: Can the probe operate in high humidity or wet environments?
   A: Yes, the stainless steel housing and sealed design protect against moisture and condensation.

9. Q: Is there any signal drift over time?
   A: Properly installed 3300 XL probes show minimal signal drift; periodic validation is recommended.

10. Q: What is the maximum cable length without signal degradation?
    A: Standard configuration supports up to 11 meters; longer distances may require signal conditioning.

Recommended Same-Series or Related Models

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.