Bently Nevada 330104-05-11-90-11-00 3300 XL 8 mm Proximity Probe

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330104-05-11-90-11-00 is a high-precision 3300 XL 8 mm Proximity Probe designed for continuous monitoring of machinery vibration and position. Part of the trusted 3300 XL series, this probe provides accurate and reliable non-contact measurements of rotating equipment shafts, enabling predictive maintenance and operational safety. Engineered for robust industrial environments, it ensures stable operation even under high temperature, pressure, or electromagnetic interference conditions.

---

Technical Specifications

---

Product Applications

• Real-time shaft vibration and position monitoring in rotating machinery

• Turbines, steam, gas, and hydroelectric generators

• Centrifugal and positive displacement pumps

• Compressors in oil, gas, and petrochemical industries

• Gearboxes and critical rotating equipment

• Predictive maintenance programs to reduce unplanned downtime

---

Product Advantages

• High accuracy for precise shaft vibration measurement

• Reliable performance in harsh industrial environments

• Long cable length (9 m) for flexible installation

• Compact 8 mm design suitable for tight installation spaces

• Durable stainless steel housing ensuring resistance to corrosion and wear

• Compatible with Bently Nevada 3300 XL monitoring system

• Early fault detection to prevent catastrophic equipment failures

• Low susceptibility to electrical noise and electromagnetic interference

---

FAQ

Q1: What is the ideal gap range for this proximity probe?
A1: The recommended gap is between 0.25 mm and 1.25 mm for accurate readings.

Q2: Can this probe operate in high-temperature environments?
A2: Yes, it operates reliably from -40°C to 120°C (-40°F to 248°F).

Q3: What type of signal does this probe output?
A3: The probe outputs an AC voltage proportional to the gap between the probe tip and the monitored shaft.

Q4: Is this probe compatible with all Bently Nevada 3300 XL monitors?
A4: Yes, it is fully compatible with standard 3300 XL proximity monitoring systems.

Q5: How is the probe shielded against electromagnetic interference?
A5: The cable is shielded to minimize electrical noise and EMI, ensuring stable signal transmission.

Q6: Can this probe be used in wet or oily environments?
A6: Yes, the stainless steel housing provides resistance to oil, moisture, and general industrial contamination.

Q7: What is the maximum vibration frequency this probe can measure?
A7: The probe can handle vibrations up to 20 kHz.

Q8: Is the cable replaceable without replacing the entire probe?
A8: Yes, the cable is serviceable and can be replaced independently.

Q9: What connector type is used on this probe?
A9: It typically uses a LEMO connector or equivalent, compatible with standard 3300 XL monitors.

Q10: Can this probe detect shaft misalignment or imbalance?
A10: Yes, when used with 3300 XL monitoring systems, it can detect misalignment, imbalance, and other dynamic shaft behaviors.

---

Related or Same-Series Models

---

Popular Bently Nevada Models

FAQ

Q1: What is the ideal gap range for this proximity probe?
A1: The recommended gap is between 0.25 mm and 1.25 mm for accurate readings.

Q2: Can this probe operate in high-temperature environments?
A2: Yes, it operates reliably from -40°C to 120°C (-40°F to 248°F).

Q3: What type of signal does this probe output?
A3: The probe outputs an AC voltage proportional to the gap between the probe tip and the monitored shaft.

Q4: Is this probe compatible with all Bently Nevada 3300 XL monitors?
A4: Yes, it is fully compatible with standard 3300 XL proximity monitoring systems.

Q5: How is the probe shielded against electromagnetic interference?
A5: The cable is shielded to minimize electrical noise and EMI, ensuring stable signal transmission.

Q6: Can this probe be used in wet or oily environments?
A6: Yes, the stainless steel housing provides resistance to oil, moisture, and general industrial contamination.

Q7: What is the maximum vibration frequency this probe can measure?
A7: The probe can handle vibrations up to 20 kHz.

Q8: Is the cable replaceable without replacing the entire probe?
A8: Yes, the cable is serviceable and can be replaced independently.

Q9: What connector type is used on this probe?
A9: It typically uses a LEMO connector or equivalent, compatible with standard 3300 XL monitors.

Q10: Can this probe detect shaft misalignment or imbalance?
A10: Yes, when used with 3300 XL monitoring systems, it can detect misalignment, imbalance, and other dynamic shaft behaviors.

Related or Same-Series Models

---

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.