Bently Nevada 330703-00-00-60-10-02-00 3300 XL 11 mm Proximity Probes

Product Introduction

The Bently Nevada 330703-00-00-60-10-02-00 is a high-precision 11 mm proximity probe from the 3300 XL series, engineered for accurate monitoring of rotating machinery. This probe provides reliable measurements of shaft displacement and vibration, which are critical for ensuring the safe and efficient operation of turbines, compressors, generators, and pumps. The 3300 XL series is widely regarded in the industry for its robust signal stability, durability, and consistent performance under challenging industrial conditions. The 330703-00-00-60-10-02-00 model is built with a stainless-steel housing, offering resistance to corrosion, mechanical stress, and temperature extremes while maintaining high-fidelity measurement performance essential for predictive maintenance programs.

Technical Specifications

Applications

The 330703-00-00-60-10-02-00 proximity probe is used in:

• Monitoring turbine, generator, and compressor shafts for precise vibration and position measurement

• Detecting misalignment, imbalance, and eccentricity in rotating machinery

• Condition monitoring of pumps, motors, and industrial drives

• Integration with Bently Nevada 3300 XL monitoring systems for real-time diagnostics

• Supporting predictive maintenance strategies to minimize unplanned downtime in industrial plants

Advantages

The 3300 XL 11 mm proximity probe provides multiple advantages:

• Reliable operation in harsh industrial environments, resistant to temperature extremes and contamination

• Stable, low-noise signal ensures accurate measurement of shaft movements

• Durable stainless-steel housing provides mechanical strength and corrosion resistance

• Compact 11 mm design allows installation in confined spaces

• Full compatibility with 3300 XL monitoring systems ensures seamless integration

• Accurate detection of both slow and fast shaft vibrations for comprehensive monitoring

• Supports predictive maintenance programs through early detection of potential equipment issues

FAQ

1. What is the maximum operating temperature of this probe?
   The probe operates reliably from -40°C to 120°C, suitable for extreme industrial environments.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can measure a shaft displacement of up to 0.25 mm. Exceeding this limit may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules for both vibration and displacement monitoring.

4. What type of signal output does this probe provide?
   The probe provides differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL monitoring systems.

5. What is the frequency response of the probe?
   It supports DC to 10 kHz frequency response, allowing accurate measurement of low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed correctly, it can measure both radial and axial shaft movements for comprehensive machinery monitoring.

7. What materials are used in the probe housing?
   The housing is stainless steel, offering durability, corrosion resistance, and protection against mechanical impact.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil, enabling precise detection of small displacements crucial for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in explosive or hazardous areas should comply with applicable safety regulations.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

FAQ

1. What is the maximum operating temperature of this probe?
   The probe operates reliably from -40°C to 120°C, suitable for extreme industrial environments.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can measure a shaft displacement of up to 0.25 mm. Exceeding this limit may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules for both vibration and displacement monitoring.

4. What type of signal output does this probe provide?
   The probe provides differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL monitoring systems.

5. What is the frequency response of the probe?
   It supports DC to 10 kHz frequency response, allowing accurate measurement of low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed correctly, it can measure both radial and axial shaft movements for comprehensive machinery monitoring.

7. What materials are used in the probe housing?
   The housing is stainless steel, offering durability, corrosion resistance, and protection against mechanical impact.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil, enabling precise detection of small displacements crucial for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in explosive or hazardous areas should comply with applicable safety regulations.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.