Bently Nevada 330703-000-040-10-02-CN 3300 XL 11 mm Proximity Probes

Product Introduction

The Bently Nevada 330703-000-040-10-02-CN is part of the 3300 XL series of proximity probes, featuring an 11 mm diameter. Designed for precision machinery monitoring, these probes are widely used in high-speed rotating equipment. The 3300 XL series has established a reputation for reliable and accurate vibration and position measurements in industrial environments, ensuring critical machinery operates safely and efficiently. This probe is suitable for severe operating conditions, offering robustness and high signal fidelity.

Technical Specifications

Applications

The 330703-000-040-10-02-CN proximity probe is used in:

• Monitoring turbine, generator, and compressor shafts for vibration and position

• Detecting shaft displacement in pumps and motors

• Early detection of machinery misalignment and imbalance

• Machinery condition monitoring in power plants, petrochemical, and industrial facilities

• Integration with 3300 XL series monitoring systems for real-time diagnostics

Advantages

The 3300 XL 11 mm proximity probe offers the following benefits:

• High reliability in harsh industrial environments, resistant to temperature variations and contaminants

• Excellent signal stability and low noise for precise measurement

• Robust stainless-steel construction ensures durability and long-term operational stability

• Compact 11 mm design allows installation in confined spaces

• Full compatibility with the Bently Nevada 3300 XL monitoring system for seamless integration

• Accurate measurement of both slow and fast shaft movements for predictive maintenance

FAQ

1. What is the maximum operating temperature of this probe?
   The probe operates reliably between -40°C and 120°C, suitable for both cold and hot industrial environments.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can accurately measure shaft displacements up to 0.25 mm. Exceeding this may reduce signal accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it integrates seamlessly with standard 3300 XL monitoring modules for vibration and position monitoring.

4. What type of signal output does this probe provide?
   The probe delivers differential or single-ended voltage output proportional to shaft movement.

5. What is the frequency response of the probe?
   It responds accurately from DC up to 10 kHz, capturing both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when properly installed, it can measure both radial and axial shaft movements.

7. What materials are used in the probe housing?
   The housing is made of stainless steel, providing durability and resistance to industrial wear.

8. Is the probe resistant to electrical noise?
   Yes, its shielded cable reduces electromagnetic interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil for precise measurement of small displacements.

10. Can this probe be used in hazardous areas?
    It is suitable for standard industrial environments; for explosive or hazardous areas, check certification requirements.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

FAQ

1. What is the maximum operating temperature of this probe?
   The probe operates reliably between -40°C and 120°C, suitable for both cold and hot industrial environments.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can accurately measure shaft displacements up to 0.25 mm. Exceeding this may reduce signal accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it integrates seamlessly with standard 3300 XL monitoring modules for vibration and position monitoring.

4. What type of signal output does this probe provide?
   The probe delivers differential or single-ended voltage output proportional to shaft movement.

5. What is the frequency response of the probe?
   It responds accurately from DC up to 10 kHz, capturing both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when properly installed, it can measure both radial and axial shaft movements.

7. What materials are used in the probe housing?
   The housing is made of stainless steel, providing durability and resistance to industrial wear.

8. Is the probe resistant to electrical noise?
   Yes, its shielded cable reduces electromagnetic interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil for precise measurement of small displacements.

10. Can this probe be used in hazardous areas?
    It is suitable for standard industrial environments; for explosive or hazardous areas, check certification requirements.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.