Bently Nevada 330703-000-050-10-01-CN 3300 XL 11 mm Proximity Probes

Product Introduction

The Bently Nevada 330703-000-050-10-01-CN is a high-precision 11 mm proximity probe from the 3300 XL series, designed for reliable monitoring of rotating machinery. This probe provides accurate measurements of shaft displacement and vibration, ensuring the operational safety and efficiency of critical equipment such as turbines, compressors, generators, and pumps. The 3300 XL series is renowned for its signal stability, robustness, and reliability in harsh industrial environments. The 330703-000-050-10-01-CN model features a durable stainless-steel construction and advanced signal fidelity, making it suitable for applications where precise condition monitoring is essential.

Technical Specifications

Applications

The 330703-000-050-10-01-CN proximity probe is widely used in:

• Monitoring turbine, generator, and compressor shafts for vibration and position

• Detecting misalignment, imbalance, and eccentricity in rotating machinery

• Condition monitoring of pumps, motors, and industrial drives

• Integration with Bently Nevada 3300 XL monitoring systems for real-time diagnostics

• Supporting predictive maintenance and early fault detection strategies in industrial plants

Advantages

The 3300 XL 11 mm proximity probe offers several key benefits:

• High reliability in harsh environments, resistant to temperature fluctuations and contamination

• Excellent signal stability and low noise, ensuring precise measurement of shaft movements

• Robust stainless-steel housing provides mechanical strength and corrosion resistance

• Compact 11 mm design allows installation in tight spaces

• Full compatibility with 3300 XL monitoring systems enables seamless integration

• Accurate measurement of both low-frequency shaft displacements and high-frequency vibrations

• Supports proactive maintenance, helping prevent unexpected machinery failures

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-050-10-01-CN probe operates reliably between -40°C and 120°C, making it suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   The probe can accurately measure shaft displacements up to 0.25 mm. Exceeding this limit may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules, ensuring proper integration for vibration and displacement monitoring.

4. What type of signal output does this probe provide?
   It provides a differential or single-ended voltage output proportional to shaft movement, suitable for direct connection to 3300 XL systems.

5. What is the frequency response of the probe?
   The probe supports a frequency range from DC up to 10 kHz, allowing accurate measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed properly, it can measure both radial and axial shaft movements for comprehensive monitoring.

7. What materials are used in the probe housing?
   The housing is constructed from stainless steel, offering high durability and resistance to corrosion and mechanical damage.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable minimizes the effects of electromagnetic interference, ensuring stable and accurate signal transmission.

9. What is the nominal sensitivity of the probe?
   The nominal sensitivity is 50 mV/mil, allowing precise detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in explosive or hazardous areas should comply with applicable safety regulations.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-050-10-01-CN probe operates reliably between -40°C and 120°C, making it suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   The probe can accurately measure shaft displacements up to 0.25 mm. Exceeding this limit may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules, ensuring proper integration for vibration and displacement monitoring.

4. What type of signal output does this probe provide?
   It provides a differential or single-ended voltage output proportional to shaft movement, suitable for direct connection to 3300 XL systems.

5. What is the frequency response of the probe?
   The probe supports a frequency range from DC up to 10 kHz, allowing accurate measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed properly, it can measure both radial and axial shaft movements for comprehensive monitoring.

7. What materials are used in the probe housing?
   The housing is constructed from stainless steel, offering high durability and resistance to corrosion and mechanical damage.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable minimizes the effects of electromagnetic interference, ensuring stable and accurate signal transmission.

9. What is the nominal sensitivity of the probe?
   The nominal sensitivity is 50 mV/mil, allowing precise detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in explosive or hazardous areas should comply with applicable safety regulations.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.