Bently Nevada 330703-000-050-10-12-CN 3300 XL 11 mm Proximity Probes

Product Introduction

The Bently Nevada 330703-000-050-10-12-CN is a high-precision 11 mm proximity probe from the 3300 XL series, designed to provide accurate and reliable monitoring of rotating machinery. This probe is ideal for detecting shaft displacement and vibration in critical industrial equipment such as turbines, compressors, generators, and pumps. The 3300 XL series is widely recognized for its signal stability, durability, and consistent performance under harsh operating conditions. The 330703-000-050-10-12-CN model features a robust stainless-steel construction, ensuring resistance to corrosion, temperature extremes, and mechanical stress, while delivering high-fidelity measurements essential for condition-based maintenance strategies.

Technical Specifications

Applications

The 330703-000-050-10-12-CN proximity probe is used for:

• Monitoring turbine, generator, and compressor shafts for precise vibration and position measurements

• Detecting shaft misalignment, imbalance, and eccentricity in rotating machinery

• Condition monitoring of pumps, motors, and industrial drives

• Integration with Bently Nevada 3300 XL monitoring systems for real-time diagnostics

• Supporting predictive maintenance programs to reduce unplanned downtime

Advantages

The 3300 XL 11 mm proximity probe provides multiple advantages:

• Reliable operation in harsh industrial environments, resistant to temperature extremes and contamination

• Stable, low-noise signal for accurate measurement of shaft movements

• Stainless-steel construction ensures mechanical strength and corrosion resistance

• Compact 11 mm design suitable for installation in tight spaces

• Fully compatible with 3300 XL monitoring systems for seamless integration

• Accurate detection of both slow and fast shaft vibrations

• Supports predictive maintenance by enabling early detection of machinery faults

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-050-10-12-CN probe functions reliably from -40°C to 120°C, suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can measure a maximum shaft displacement of 0.25 mm. Exceeding this gap may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules for both vibration and position measurement.

4. What type of signal output does this probe provide?
   The probe delivers a differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL systems.

5. What is the frequency response of the probe?
   It supports DC to 10 kHz frequency response, allowing accurate measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed correctly, it can measure both radial and axial shaft movements.

7. What materials are used in the probe housing?
   The housing is stainless steel, providing durability, corrosion resistance, and protection against mechanical impact.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference for stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The nominal sensitivity is 50 mV/mil, enabling precise detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    It is suitable for standard industrial environments; use in explosive or hazardous areas must comply with applicable safety standards.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-050-10-12-CN probe functions reliably from -40°C to 120°C, suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can measure a maximum shaft displacement of 0.25 mm. Exceeding this gap may reduce measurement accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it is fully compatible with standard 3300 XL monitoring modules for both vibration and position measurement.

4. What type of signal output does this probe provide?
   The probe delivers a differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL systems.

5. What is the frequency response of the probe?
   It supports DC to 10 kHz frequency response, allowing accurate measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, when installed correctly, it can measure both radial and axial shaft movements.

7. What materials are used in the probe housing?
   The housing is stainless steel, providing durability, corrosion resistance, and protection against mechanical impact.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference for stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The nominal sensitivity is 50 mV/mil, enabling precise detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    It is suitable for standard industrial environments; use in explosive or hazardous areas must comply with applicable safety standards.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.