Bently Nevada 330703-000-060-10-02-05 3300 XL 11 mm Proximity Probes

Product Introduction

The Bently Nevada 330703-000-060-10-02-05 is a high-precision 11 mm proximity probe from the 3300 XL series, engineered to provide accurate monitoring of rotating machinery. This probe is ideal for measuring shaft displacement and vibration in critical equipment, such as turbines, compressors, generators, and pumps. The 3300 XL series is well-known in the industry for its robust signal stability, high reliability, and consistent performance under challenging industrial conditions. The 330703-000-060-10-02-05 model features a stainless-steel construction that ensures durability, corrosion resistance, and mechanical strength, while delivering precise measurement performance for predictive maintenance and condition monitoring applications.

Technical Specifications

Applications

The 330703-000-060-10-02-05 proximity probe is suitable for:

• Monitoring turbine, generator, and compressor shafts for precise vibration and position measurement

• Detecting shaft misalignment, imbalance, or eccentricity in rotating machinery

• Condition monitoring of pumps, motors, and industrial drives

• Integration with Bently Nevada 3300 XL monitoring systems for real-time diagnostic data

• Supporting predictive maintenance programs to minimize unplanned downtime and prevent equipment failure

Advantages

The 3300 XL 11 mm proximity probe provides the following advantages:

• High reliability in harsh industrial environments, resistant to temperature extremes, vibration, and contamination

• Stable, low-noise signal ensures precise measurement of shaft movements

• Stainless-steel housing offers mechanical strength and corrosion resistance

• Compact 11 mm design allows installation in tight spaces

• Full compatibility with 3300 XL monitoring systems ensures seamless integration

• Capable of accurately measuring both low- and high-frequency shaft vibrations

• Enables predictive maintenance and early fault detection for critical machinery

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-060-10-02-05 probe operates reliably between -40°C and 120°C, suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can accurately measure a shaft displacement of up to 0.25 mm. Exceeding this limit may compromise signal accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it integrates seamlessly with standard 3300 XL monitoring modules for both vibration and shaft position monitoring.

4. What type of signal output does this probe provide?
   The probe provides a differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL systems.

5. What is the frequency response of the probe?
   The probe supports DC to 10 kHz frequency response, allowing measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, with proper installation, it can detect both radial and axial shaft movements for comprehensive condition monitoring.

7. What materials are used in the probe housing?
   The housing is made of stainless steel, providing mechanical durability, corrosion resistance, and protection from environmental factors.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil, allowing accurate detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in hazardous or explosive areas should comply with local safety and certification requirements.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

FAQ

1. What is the maximum operating temperature of this probe?
   The 330703-000-060-10-02-05 probe operates reliably between -40°C and 120°C, suitable for extreme industrial conditions.

2. What is the maximum probe-to-shaft gap that can be measured?
   It can accurately measure a shaft displacement of up to 0.25 mm. Exceeding this limit may compromise signal accuracy.

3. Is this probe compatible with all 3300 XL series monitoring modules?
   Yes, it integrates seamlessly with standard 3300 XL monitoring modules for both vibration and shaft position monitoring.

4. What type of signal output does this probe provide?
   The probe provides a differential or single-ended voltage output proportional to shaft movement, compatible with 3300 XL systems.

5. What is the frequency response of the probe?
   The probe supports DC to 10 kHz frequency response, allowing measurement of both low- and high-frequency vibrations.

6. Can this probe detect both axial and radial vibration?
   Yes, with proper installation, it can detect both radial and axial shaft movements for comprehensive condition monitoring.

7. What materials are used in the probe housing?
   The housing is made of stainless steel, providing mechanical durability, corrosion resistance, and protection from environmental factors.

8. Is the probe resistant to electrical noise?
   Yes, the shielded cable design minimizes electromagnetic and radio frequency interference, ensuring stable signal transmission.

9. What is the nominal sensitivity of the probe?
   The probe has a nominal sensitivity of 50 mV/mil, allowing accurate detection of small displacements critical for early fault detection.

10. Can this probe be used in hazardous areas?
    While suitable for standard industrial environments, its use in hazardous or explosive areas should comply with local safety and certification requirements.

Related Models (3300 XL Series or Compatible)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.