Excellent PLC
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666033393 | |||||||
| +8613666033393 | ||||||||
| 13666033393 | ||||||||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Product Introduction
The Bently Nevada 330851-02-000-050-90-00-05 3300 XL 25 mm Proximity Probe is part of the 3300 XL series, designed for precise shaft vibration measurement in industrial rotating machinery. It is engineered to provide accurate, reliable proximity readings for turbine, compressor, and generator applications. This probe ensures enhanced monitoring of critical machinery, allowing operators to detect potential faults early, minimize unplanned downtime, and optimize maintenance schedules.
Product Specifications
| Parameter | Specification |
|---|---|
| Probe Type | Proximity Probe |
| Measurement Range | 0–25 mm |
| Total Length | 9 m |
| Weight | 0.59 kg |
| Sensor Tip | Standard |
| Cable Type | Shielded twisted pair |
| Output | AC differential voltage |
| Operating Temperature | -40°C to 120°C |
| Housing Material | Stainless Steel |
| Mounting | Threaded stud or clamp |
| Connector | Standard Bently connector |
Product Applications
-
Shaft vibration monitoring in turbines, compressors, and generators
-
Rotating machinery protection in power plants and refineries
-
Condition monitoring for industrial equipment
-
Integration with Bently Nevada 3300 XL monitoring systems
-
Critical machinery surveillance to prevent catastrophic failures
Product Advantages
-
High-accuracy measurement for critical machinery monitoring
-
Robust design for industrial environments
-
Long cable length (9 m) supports flexible installation
-
Lightweight and easy to install (2 kg)
-
Compatibility with the 3300 XL series monitoring systems
-
Reliable and stable output reduces false alarms and maintenance overhead
FAQ
Q1: What is the typical operating voltage for this proximity probe?
A1: The probe operates using standard 3300 XL system excitation voltage, typically 24 VDC.
Q2: Can this probe measure at distances smaller than 25 mm?
A2: Yes, the probe provides linear measurement down to zero proximity, though the specified range is optimized up to 25 mm.
Q3: Is the probe compatible with other Bently Nevada monitoring systems outside the 3300 XL series?
A3: It is primarily designed for 3300 XL systems; use with other systems may require signal conditioning or calibration adjustments.
Q4: How does temperature affect the probe’s performance?
A4: Performance remains stable within the operating temperature range of -40°C to 120°C; extreme temperatures may require additional protective measures.
Q5: What type of output signal does this probe provide?
A5: It outputs an AC differential voltage proportional to the shaft displacement.
Q6: Can the cable be extended beyond 9 m without affecting signal quality?
A6: Cable extensions may be possible with shielded and matched impedance wiring, but the maximum recommended length should not exceed the system specifications to avoid signal degradation.
Q7: Does the probe require calibration before installation?
A7: The probe is factory-calibrated, but verification with a reference standard during installation is recommended.
Q8: Is the probe resistant to EMI (Electromagnetic Interference)?
A8: Yes, the shielded twisted pair cable design minimizes EMI influence, ensuring stable readings.
Q9: Can the probe operate in high-vibration environments?
A9: Yes, the 3300 XL probe is designed to withstand high vibration without measurement drift or damage.
Q10: What maintenance is required for long-term operation?
A10: Minimal maintenance is needed; periodic inspection of the connector, cable integrity, and signal quality is sufficient.
Related 3300 XL Series / Similar Models
| Model | Measurement Range | Total Length | Weight |
|---|---|---|---|
| 330851-02-000-050-10-00-05 | 25 mm | 9 m | 2 kg |
| 330851-02-000-040-50-00-00 | 25 mm | 9 m | 2 kg |
| 330851-02-000-030-10-00-05 | 25 mm | 9 m | 2 kg |
| 330851-02-000-040-10-00-05 | 25 mm | 9 m | 2 kg |
| 330851-02-000-050-10-01-00 | 25 mm | 9 m | 2 kg |
| 330851-02-000-030-50-00-00 | 25 mm | 9 m | 2 kg |
Popular Bently Nevada Models
| Model | Description | Measurement Range | Weight |
|---|---|---|---|
| 3300 XL 25 mm Probe | Standard proximity probe | 25 mm | 2 kg |
| 3300 XL 50 mm Probe | Extended range probe | 50 mm | 2.5 kg |
| 3300 XL 5 mm Probe | Short-range probe | 5 mm | 1.8 kg |
| 3300 XL 18 mm Probe | Medium-range probe | 18 mm | 2 kg |
| 3500 Monitoring System | Complete vibration monitoring system | N/A | 15 kg |
| 3300 XL Sensor Kit | Proximity sensor kit for installations | 25 mm | 2.2 kg |
