Bently Nevada 330851-02-000-060-50-00-CN 3300 XL 25 mm Proximity Probe

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330851-02-000-060-50-00-CN 3300 XL 25 mm Proximity Probe is a high-precision, industrial-grade displacement sensor used for vibration and position monitoring of rotating machinery. Designed with robust materials and advanced electronics, this probe ensures reliable performance in demanding environments such as power generation, oil & gas, and heavy industrial facilities. The 25 mm probe tip allows accurate clearance measurement, essential for early detection of machinery wear or misalignment.

---

Product Specifications

---

Product Applications

• Continuous vibration monitoring of turbines, generators, and compressors

• Shaft displacement measurement for rotating machinery

• Condition-based maintenance and early fault detection

• Integration with Bently Nevada 3300 XL monitoring systems

• Monitoring in high-speed industrial machinery and critical process equipment

---

Product Advantages

• High Accuracy: Delivers precise measurements over its full range for reliable monitoring

• Robust Construction: Resistant to high temperatures, vibration, and harsh industrial environments

• Extended Cable Options: 5 m cable length allows flexible installation without signal degradation

• Low Weight: Compact and lightweight design minimizes stress on mounting points

• Compatibility: Seamless integration with the Bently Nevada 3300 XL series monitoring modules

• Maintenance-Friendly: Simple installation and replacement without complex recalibration

---

FAQ

Q1: What is the recommended excitation voltage for the 3300 XL proximity probe?
A1: The probe is designed to operate with a maximum excitation voltage of 24 V DC.

Q2: Can this probe operate in high-vibration environments?
A2: Yes, it can tolerate vibrations up to 100 g without performance degradation.

Q3: What is the frequency response range of the probe?
A3: The frequency response extends from DC up to 12 kHz, suitable for high-speed machinery monitoring.

Q4: Is this probe compatible with older 3300 series monitoring systems?
A4: It is specifically designed for the 3300 XL series, but may require interface verification for older 3300 modules.

Q5: Can this probe be used outdoors or in extreme temperatures?
A5: Yes, it operates reliably in temperatures ranging from -40°C to 121°C (-40°F to 250°F).

Q6: How is the probe connected to the monitoring system?
A6: The probe uses a shielded coaxial cable with a Microdot or custom connector, depending on system configuration.

Q7: What is the sensor tip material and why is it chosen?
A7: The tip is made of stainless steel for durability and corrosion resistance in industrial environments.

Q8: How precise is the probe in measuring shaft displacement?
A8: The probe provides high-resolution measurements, with accuracy suitable for detecting small machinery misalignments or vibration patterns.

Q9: Can the 5 m cable length be extended further?
A9: Custom cable extensions are possible but should maintain proper shielding to prevent signal loss or interference.

Q10: Is this probe suitable for explosive or hazardous areas?
A10: It depends on the certification. Standard 3300 XL probes are not intrinsically safe; certified variants must be selected for hazardous locations.

---

Recommended Related or Same-Series Models

---

Popular Bently Nevada Models

FAQ

Q1: What is the recommended excitation voltage for the 3300 XL proximity probe?
A1: The probe is designed to operate with a maximum excitation voltage of 24 V DC.

Q2: Can this probe operate in high-vibration environments?
A2: Yes, it can tolerate vibrations up to 100 g without performance degradation.

Q3: What is the frequency response range of the probe?
A3: The frequency response extends from DC up to 12 kHz, suitable for high-speed machinery monitoring.

Q4: Is this probe compatible with older 3300 series monitoring systems?
A4: It is specifically designed for the 3300 XL series, but may require interface verification for older 3300 modules.

Q5: Can this probe be used outdoors or in extreme temperatures?
A5: Yes, it operates reliably in temperatures ranging from -40°C to 121°C (-40°F to 250°F).

Q6: How is the probe connected to the monitoring system?
A6: The probe uses a shielded coaxial cable with a Microdot or custom connector, depending on system configuration.

Q7: What is the sensor tip material and why is it chosen?
A7: The tip is made of stainless steel for durability and corrosion resistance in industrial environments.

Q8: How precise is the probe in measuring shaft displacement?
A8: The probe provides high-resolution measurements, with accuracy suitable for detecting small machinery misalignments or vibration patterns.

Q9: Can the 5 m cable length be extended further?
A9: Custom cable extensions are possible but should maintain proper shielding to prevent signal loss or interference.

Q10: Is this probe suitable for explosive or hazardous areas?
A10: It depends on the certification. Standard 3300 XL probes are not intrinsically safe; certified variants must be selected for hazardous locations.

Recommended Related or Same-Series Models

---

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.