Bently Nevada 330851-02-000-110-10-00-00 3300 XL 25 mm Proximity Probe

Product Introduction

The Bently Nevada 330851-02-000-110-10-00-00 3300 XL 25 mm Proximity Probe is part of the renowned 3300 XL series, designed for high-precision machinery monitoring in critical industrial applications. This probe provides accurate shaft vibration measurements and radial displacement detection for rotating equipment, ensuring reliable early-warning detection of machinery issues. Its robust construction and high repeatability make it suitable for use in severe environments, including turbines, compressors, and generators.

Technical Specifications

Applications

• Steam and gas turbines for shaft vibration monitoring

• Centrifugal and reciprocating compressors

• Electric motors and generators

• Pumps and critical rotating machinery

• Process plants requiring precise shaft position sensing

Advantages

• High Accuracy: Provides precise displacement measurements for early detection of misalignment and imbalance.

• Durable Construction: Stainless steel and armored cable allow operation in harsh environments.

• Reliable Repeatability: Minimal signal drift ensures consistent long-term performance.

• Easy Integration: Compatible with standard 3300 XL series monitoring systems.

• Fast Response: Less than 1 ms response time for real-time monitoring.

• Wide Operating Range: Works effectively across extreme temperatures and environmental conditions.

FAQ

1. Q: What is the maximum vibration frequency this probe can accurately measure?
   A: The probe supports vibration frequencies up to 10 kHz without loss of signal fidelity.

2. Q: Can this probe operate in high humidity environments?
   A: Yes, it is rated for IP65, suitable for high humidity and wet conditions.

3. Q: What type of output signal does the 3300 XL probe provide?
   A: It provides an AC/DC voltage output proportional to shaft displacement.

4. Q: Is the probe compatible with older 3300 series monitor systems?
   A: Yes, it is backward compatible with previous 3300 series monitors.

5. Q: Can the probe measure non-metallic shaft surfaces?
   A: No, it requires a conductive surface to induce the eddy-current signal.

6. Q: What is the recommended gap setting for optimal performance?
   A: The probe is calibrated for a 25 mm measurement gap; operating outside ±10% may reduce accuracy.

7. Q: How is the probe signal affected by temperature fluctuations?
   A: The probe is designed to compensate for temperature effects, maintaining linearity across -40°C to +120°C.

8. Q: Can this probe be used in explosive environments?
   A: Yes, when used with certified 3300 XL intrinsically safe monitors, it can operate in hazardous locations.

9. Q: How should the probe be installed for minimal interference?
   A: It should be mounted per Bently’s guidelines, with proper grounding and shielding to avoid EMI interference.

10. Q: Does the probe require calibration before use?
    A: It comes factory-calibrated; periodic field verification is recommended for critical applications.

Related Models

Popular Models from Bently Nevada

FAQ

1. Q: What is the maximum vibration frequency this probe can accurately measure?
   A: The probe supports vibration frequencies up to 10 kHz without loss of signal fidelity.

2. Q: Can this probe operate in high humidity environments?
   A: Yes, it is rated for IP65, suitable for high humidity and wet conditions.

3. Q: What type of output signal does the 3300 XL probe provide?
   A: It provides an AC/DC voltage output proportional to shaft displacement.

4. Q: Is the probe compatible with older 3300 series monitor systems?
   A: Yes, it is backward compatible with previous 3300 series monitors.

5. Q: Can the probe measure non-metallic shaft surfaces?
   A: No, it requires a conductive surface to induce the eddy-current signal.

6. Q: What is the recommended gap setting for optimal performance?
   A: The probe is calibrated for a 25 mm measurement gap; operating outside ±10% may reduce accuracy.

7. Q: How is the probe signal affected by temperature fluctuations?
   A: The probe is designed to compensate for temperature effects, maintaining linearity across -40°C to +120°C.

8. Q: Can this probe be used in explosive environments?
   A: Yes, when used with certified 3300 XL intrinsically safe monitors, it can operate in hazardous locations.

9. Q: How should the probe be installed for minimal interference?
   A: It should be mounted per Bently’s guidelines, with proper grounding and shielding to avoid EMI interference.

10. Q: Does the probe require calibration before use?
    A: It comes factory-calibrated; periodic field verification is recommended for critical applications.

Related Models

Popular Models from Bently Nevada

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.