Bently Nevada 330851-02-010-066-90-00-05 3300 XL 25 mm Proximity Probe

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330851-02-010-066-90-00-05 3300 XL 25 mm Proximity Probe is a high-precision sensor designed for measuring the distance between the probe tip and a conductive target. As part of the 3300 XL series, this probe is widely utilized in machinery condition monitoring and protection systems, especially for critical rotating equipment. Its robust design ensures reliable performance in harsh industrial environments, providing accurate displacement and vibration data for predictive maintenance and safety applications.

---

Product Parameters

---

Product Applications

• Monitoring shaft vibration in turbines, compressors, and pumps

• Measuring rotor-to-stator clearances in large machinery

• Condition monitoring for predictive maintenance programs

• Overspeed and shaft displacement detection

• Integration with Bently Nevada 3300 XL Proximitor® sensors for complete monitoring solutions

---

Product Advantages

• High Accuracy: Factory-calibrated for precise displacement measurements.

• Reliability: Proven durability under harsh industrial and environmental conditions.

• Compatibility: Fully compatible with 3300 XL Proximitor® sensors and system monitors.

• Extended Range: Large probe tip allows accurate measurements over wider gaps.

• Corrosion Resistance: Stainless steel construction ensures long-term performance.

• Predictive Maintenance Support: Enables early detection of faults in rotating machinery, reducing unplanned downtime.

---

FAQ

Q1: What type of signal does the 330851-02-010-066-90-00-05 probe generate?
A1: It generates a voltage signal proportional to the distance between the probe tip and the conductive target surface.

Q2: Can this probe be used with non-metallic targets?
A2: No, it is specifically designed to measure displacement relative to conductive (metallic) targets.

Q3: How is the probe calibrated for accuracy?
A3: Each probe is factory-calibrated according to API 670 standards for consistent measurement accuracy.

Q4: What Proximitor® sensor models are compatible with this probe?
A4: It is compatible with 3300 XL Proximitor® sensors, ensuring proper signal conditioning and monitoring.

Q5: How does cable length affect probe performance?
A5: Cable length is factory-matched to the Proximitor® sensor; incorrect cable lengths can lead to measurement inaccuracies.

Q6: Is temperature compensation included in this probe design?
A6: Yes, the probe is engineered to maintain stable performance across its rated temperature range.

Q7: Can the probe detect both static and dynamic displacement?
A7: Yes, it can measure both static shaft position and dynamic vibration displacement.

Q8: What frequency response does this probe support?
A8: It supports a wide frequency response suitable for high-speed rotating machinery monitoring.

Q9: Does electromagnetic interference affect probe readings?
A9: The coaxial cable design and shielding minimize electromagnetic interference, ensuring signal integrity.

Q10: Can the probe be field-repaired if damaged?
A10: No, if the probe is damaged, it must be replaced to maintain measurement accuracy.

---

Related Models

---

Popular Models from the Same Brand

FAQ

Q1: What type of signal does the 330851-02-010-066-90-00-05 probe generate?
A1: It generates a voltage signal proportional to the distance between the probe tip and the conductive target surface.

Q2: Can this probe be used with non-metallic targets?
A2: No, it is specifically designed to measure displacement relative to conductive (metallic) targets.

Q3: How is the probe calibrated for accuracy?
A3: Each probe is factory-calibrated according to API 670 standards for consistent measurement accuracy.

Q4: What Proximitor® sensor models are compatible with this probe?
A4: It is compatible with 3300 XL Proximitor® sensors, ensuring proper signal conditioning and monitoring.

Q5: How does cable length affect probe performance?
A5: Cable length is factory-matched to the Proximitor® sensor; incorrect cable lengths can lead to measurement inaccuracies.

Q6: Is temperature compensation included in this probe design?
A6: Yes, the probe is engineered to maintain stable performance across its rated temperature range.

Q7: Can the probe detect both static and dynamic displacement?
A7: Yes, it can measure both static shaft position and dynamic vibration displacement.

Q8: What frequency response does this probe support?
A8: It supports a wide frequency response suitable for high-speed rotating machinery monitoring.

Q9: Does electromagnetic interference affect probe readings?
A9: The coaxial cable design and shielding minimize electromagnetic interference, ensuring signal integrity.

Q10: Can the probe be field-repaired if damaged?
A10: No, if the probe is damaged, it must be replaced to maintain measurement accuracy.

Related Models

---

Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.