Bently Nevada 330903-00-03-50-02-RU 3300 NSv Proximity Probe

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 330903-00-03-50-02-RU 3300 NSv Proximity Probe is an advanced non-contact vibration and displacement measurement probe designed for industrial rotating machinery. It belongs to the 3300 NSv (Narrow Side-view) series, which is specifically engineered for applications with limited installation space, where standard probes cannot be mounted.

This probe utilizes eddy current measurement principles, detecting the proximity of a conductive surface such as a turbine or compressor shaft. It ensures highly reliable and accurate vibration monitoring, making it essential for predictive maintenance and machinery protection systems.

---

Technical Specifications

---

Product Applications

• Gas turbines and steam turbines

• Compressors (centrifugal and reciprocating)

• Pumps and motors in critical process industries

• Gearboxes and high-speed rotating machinery

• Oil & gas, petrochemical, and power generation sectors

• Condition monitoring and predictive maintenance systems

---

Product Advantages

• Compact Design: Slim probe tip ideal for installations with space limitations.

• High Accuracy: Provides precise vibration and displacement measurements in harsh environments.

• Rugged Construction: Stainless steel and high-performance insulation materials ensure durability.

• Broad Compatibility: Fully compatible with the Bently Nevada 3300 NSv system and API 670 compliance.

• Temperature and Pressure Resistant: Performs reliably under extreme industrial conditions.

• Enhanced Machinery Protection: Critical in preventing machinery damage through early fault detection.

---

FAQ

Q1: How does the 330903-00-03-50-02-RU probe measure shaft vibration?
A1: It uses eddy current technology, generating an electromagnetic field and detecting changes in the conductive shaft surface to measure displacement and vibration.

Q2: What signal does the probe provide to the monitoring system?
A2: It outputs a voltage proportional to the shaft-to-probe distance, typically -200 mV/μm.

Q3: Can this probe be used with standard 3300 Proximitor sensors?
A3: No, it is specifically designed for the 3300 NSv Proximitor sensors to ensure proper calibration and linearity.

Q4: What is the typical linear range of the probe?
A4: The linear range is 0.25 mm to 2.0 mm (10 to 80 mils).

Q5: How does temperature affect measurement accuracy?
A5: The probe is designed with temperature compensation to minimize drift across its full operating range (-35°C to +177°C).

Q6: What is the maximum pressure rating of the probe housing?
A6: It can withstand up to 10,000 psi, making it suitable for high-pressure machinery.

Q7: What type of connector is used on this probe?
A7: It uses a miniature coaxial connector compatible with NSv extension cables.

Q8: Can the probe be installed in hazardous environments?
A8: Yes, with proper certifications and installation guidelines, it is suitable for hazardous and explosive environments.

Q9: Does the probe require recalibration during its service life?
A9: Typically, no recalibration is needed unless there is cable damage or sensor replacement.

Q10: How is electrical interference minimized in this probe?
A10: It features shielded coaxial cable design and grounded stainless steel housing to reduce noise and interference.

---

Related Models

---

Popular Models from the Same Brand

FAQ

Q1: How does the 330903-00-03-50-02-RU probe measure shaft vibration?
A1: It uses eddy current technology, generating an electromagnetic field and detecting changes in the conductive shaft surface to measure displacement and vibration.

Q2: What signal does the probe provide to the monitoring system?
A2: It outputs a voltage proportional to the shaft-to-probe distance, typically -200 mV/μm.

Q3: Can this probe be used with standard 3300 Proximitor sensors?
A3: No, it is specifically designed for the 3300 NSv Proximitor sensors to ensure proper calibration and linearity.

Q4: What is the typical linear range of the probe?
A4: The linear range is 0.25 mm to 2.0 mm (10 to 80 mils).

Q5: How does temperature affect measurement accuracy?
A5: The probe is designed with temperature compensation to minimize drift across its full operating range (-35°C to +177°C).

Q6: What is the maximum pressure rating of the probe housing?
A6: It can withstand up to 10,000 psi, making it suitable for high-pressure machinery.

Q7: What type of connector is used on this probe?
A7: It uses a miniature coaxial connector compatible with NSv extension cables.

Q8: Can the probe be installed in hazardous environments?
A8: Yes, with proper certifications and installation guidelines, it is suitable for hazardous and explosive environments.

Q9: Does the probe require recalibration during its service life?
A9: Typically, no recalibration is needed unless there is cable damage or sensor replacement.

Q10: How is electrical interference minimized in this probe?
A10: It features shielded coaxial cable design and grounded stainless steel housing to reduce noise and interference.

Related Models

---

Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.