Bently Nevada 330905-00-12-05-02-05 3300 NSv Proximity Probes

Product Introduction

The Bently Nevada 330905-00-12-05-02-05 3300 NSv Proximity Probe is an advanced non-contact sensor designed for precise vibration and shaft displacement measurement in critical rotating machinery. Part of the Bently Nevada 3300 NSv (Narrow Side-view) series, it provides accurate monitoring in confined spaces and demanding industrial conditions. Its rugged construction and high linearity make it an ideal choice for turbines, compressors, pumps, and generators where early fault detection is vital for operational safety and reliability.

Product Specifications

Applications

• Turbines (Steam & Gas): Continuous shaft vibration monitoring to detect imbalance or misalignment before damage occurs.

• Compressors: Identification of bearing wear, surge, or cavitation-related vibrations.

• Motors & Generators: Real-time shaft position monitoring for operational stability.

• Gearboxes & Fans: Early detection of mechanical looseness or misalignment for preventive maintenance.

• Pumps: Protection against shaft deflection and dynamic instabilities in critical pumping systems.

Advantages

• High Precision: Outstanding linearity ensures accurate displacement and vibration readings.

• Compact Size: Slim probe tip enables installation in restricted or hard-to-reach areas.

• Rugged Build: Stainless steel housing resists corrosion and harsh operating environments.

• Wide Temperature Range: Reliable operation from −35 °C to +177 °C for extreme applications.

• Electromagnetic Immunity: Built-in shielding provides stable performance in electrically noisy plants.

• Easy Integration: Fully compatible with Bently Nevada 3300 XL Proximitor sensors and monitoring systems.

• Low Maintenance: Non-contact sensing minimizes mechanical wear, extending system longevity.

FAQ

1. How is the 330905 probe calibrated to ensure accuracy?
   It is factory-calibrated with a standard AISI 4140 steel target to maintain specified sensitivity and linearity.

2. Can this probe operate with other Bently Nevada Proximitor drivers?
   Yes, it is fully compatible with the 3300 XL Proximitor and approved NSv extension cables.

3. What is the maximum operating vibration frequency it can track?
   The probe accurately monitors vibration signals up to 10 kHz within the linear operating range.

4. What is the typical electrical output of the probe?
   It produces a voltage proportional to shaft displacement, typically 0–20 V peak-to-peak.

5. Does it require external shielding for electromagnetic interference?
   No. Integrated cable shielding and design enable reliable use in high-EMI industrial settings.

6. Can the probe be used in high-pressure or oil-lubricated environments?
   Yes, it is rated up to 500 psi and suitable for submerged installations in machinery housings.

7. How does the probe handle temperature fluctuations?
   Stainless-steel construction and internal compensation maintain accuracy across its full temperature range.

8. Is it capable of both radial and axial measurement?
   Yes, installation orientation determines whether radial or axial shaft displacement is measured.

9. What type of signal conditioning is required?
   It requires a Bently Nevada Proximitor or equivalent driver for power supply and signal processing.

10. How does cable length affect probe calibration?
    Each probe is calibrated for a specific cable length; using the matching extension cable preserves accuracy.

Recommended Related Models (Same Series/Similar)

Popular Bently Nevada Models

FAQ

1. How is the 330905 probe calibrated to ensure accuracy?
   It is factory-calibrated with a standard AISI 4140 steel target to maintain specified sensitivity and linearity.

2. Can this probe operate with other Bently Nevada Proximitor drivers?
   Yes, it is fully compatible with the 3300 XL Proximitor and approved NSv extension cables.

3. What is the maximum operating vibration frequency it can track?
   The probe accurately monitors vibration signals up to 10 kHz within the linear operating range.

4. What is the typical electrical output of the probe?
   It produces a voltage proportional to shaft displacement, typically 0–20 V peak-to-peak.

5. Does it require external shielding for electromagnetic interference?
   No. Integrated cable shielding and design enable reliable use in high-EMI industrial settings.

6. Can the probe be used in high-pressure or oil-lubricated environments?
   Yes, it is rated up to 500 psi and suitable for submerged installations in machinery housings.

7. How does the probe handle temperature fluctuations?
   Stainless-steel construction and internal compensation maintain accuracy across its full temperature range.

8. Is it capable of both radial and axial measurement?
   Yes, installation orientation determines whether radial or axial shaft displacement is measured.

9. What type of signal conditioning is required?
   It requires a Bently Nevada Proximitor or equivalent driver for power supply and signal processing.

10. How does cable length affect probe calibration?
    Each probe is calibrated for a specific cable length; using the matching extension cable preserves accuracy.

Recommended Related Models (Same Series/Similar)

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.