Bently Nevada 990-05-70-03-00 990 Vibration Transmitter

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 990-05-70-03-00 990 Vibration Transmitter is a reliable industrial monitoring device designed to convert vibration signals into proportional 4–20 mA outputs. It is widely applied in critical rotating machinery to detect abnormal vibration, prevent failures, and support predictive maintenance. With its rugged design, high accuracy, and compatibility with industry-standard systems, it ensures seamless integration into plant monitoring and control architectures.

---

Technical Specifications

---

Product Applications

• Turbines – Continuous monitoring of shaft vibration to prevent catastrophic failures.

• Compressors – Early detection of imbalance, misalignment, or bearing wear.

• Pumps and Fans – Identifying cavitation, resonance, or operational instabilities.

• Motors and Generators – Monitoring mechanical integrity under dynamic loads.

• Industrial Processing Equipment – Ensuring reliability in oil & gas, petrochemical, and power generation plants.

---

Product Advantages

• High Accuracy – Delivers precise vibration measurement across a wide frequency range.

• Compact Design – Small form factor makes installation flexible in space-limited environments.

• Rugged Construction – Withstands harsh industrial environments with IP65 protection.

• Standardized Output – Provides 4–20 mA output compatible with DCS, PLC, and SCADA systems.

• Cost-Effective Monitoring – Reduces need for extensive monitoring systems by offering standalone capability.

• Enhanced Reliability – Designed by Bently Nevada, a trusted leader in condition monitoring technology.

---

FAQ

Q1: What type of vibration does the 990-05-70-03-00 measure?
A1: It is capable of measuring both displacement and velocity, depending on the probe configuration.

Q2: Can the transmitter interface directly with a PLC system?
A2: Yes, it provides a standard 4–20 mA output which can be directly integrated with most PLCs.

Q3: What is the maximum cable length supported between the probe and transmitter?
A3: It generally supports up to 300 meters depending on the probe type and installation conditions.

Q4: Is the output signal linear across the measurement range?
A4: Yes, the 4–20 mA output is fully linear with respect to the vibration input signal.

Q5: Can the unit be calibrated in the field?
A5: Yes, the transmitter supports field calibration to ensure accuracy in specific installations.

Q6: How does it handle electrical noise in industrial environments?
A6: It incorporates internal filtering and shielding to minimize the effects of EMI and RFI.

Q7: What type of probes are compatible with this transmitter?
A7: It is compatible with standard Bently Nevada proximity probes and accelerometer inputs.

Q8: What diagnostic features are available in the transmitter?
A8: It includes fault detection for probe disconnection, short circuits, and signal anomalies.

Q9: Does the transmitter support redundant monitoring?
A9: It can be integrated into redundant monitoring systems through multiple 4–20 mA channels.

Q10: Can the transmitter operate in hazardous areas?
A10: Yes, when installed with appropriate certified enclosures, it is suitable for hazardous industrial zones.

---

Recommended Same-Series or Related Models

---

Popular Models from the Same Brand

FAQ

Q1: What type of vibration does the 990-05-70-03-00 measure?
A1: It is capable of measuring both displacement and velocity, depending on the probe configuration.

Q2: Can the transmitter interface directly with a PLC system?
A2: Yes, it provides a standard 4–20 mA output which can be directly integrated with most PLCs.

Q3: What is the maximum cable length supported between the probe and transmitter?
A3: It generally supports up to 300 meters depending on the probe type and installation conditions.

Q4: Is the output signal linear across the measurement range?
A4: Yes, the 4–20 mA output is fully linear with respect to the vibration input signal.

Q5: Can the unit be calibrated in the field?
A5: Yes, the transmitter supports field calibration to ensure accuracy in specific installations.

Q6: How does it handle electrical noise in industrial environments?
A6: It incorporates internal filtering and shielding to minimize the effects of EMI and RFI.

Q7: What type of probes are compatible with this transmitter?
A7: It is compatible with standard Bently Nevada proximity probes and accelerometer inputs.

Q8: What diagnostic features are available in the transmitter?
A8: It includes fault detection for probe disconnection, short circuits, and signal anomalies.

Q9: Does the transmitter support redundant monitoring?
A9: It can be integrated into redundant monitoring systems through multiple 4–20 mA channels.

Q10: Can the transmitter operate in hazardous areas?
A10: Yes, when installed with appropriate certified enclosures, it is suitable for hazardous industrial zones.

Recommended Same-Series or Related Models

---

Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.