Bently Nevada 990-10-XX-01-05 285269-01 990 Vibration Transmitter

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Bently Nevada 990-10-XX-01-05 285269-01 Vibration Transmitter is a high-performance device designed for continuous vibration monitoring in industrial machinery. Part of the 990 series, this transmitter converts vibration signals from sensors into standardized outputs suitable for machinery protection systems, control systems, or condition monitoring setups.

This transmitter is engineered to provide reliable and precise vibration data from rotating and reciprocating machinery. It accepts input from proximity probes, accelerometers, or velocity transducers and delivers a proportional analog output, ensuring accurate representation of machinery vibration levels. The robust design allows stable operation under industrial environmental conditions, including temperature fluctuations, electrical noise, and mechanical stress.

The 990-10-XX-01-05 transmitter is widely used in critical industrial plants where machinery reliability and safety are paramount. Its compatibility with various vibration sensors and systems makes it an essential component for predictive maintenance programs and machinery protection strategies.

---

Product Parameters

---

Product Applications

The 990-10-XX-01-05 Vibration Transmitter is used in a variety of industrial machinery monitoring applications:

• Steam and Gas Turbines: Measures vibration to detect imbalance, misalignment, or bearing issues.

• Centrifugal and Reciprocating Compressors: Monitors rotor and shaft vibration to prevent catastrophic failures.

• Generators: Tracks vibration patterns in rotor and stator components for predictive maintenance.

• Pumps and Fans: Detects abnormal vibration, indicating mechanical wear or operational issues.

• Gearboxes: Measures shaft and gear vibration to prevent excessive wear.

• Industrial Machinery Protection Systems: Integrates with alarms and shutdown systems for machinery safety.

---

Product Advantages

The Bently Nevada 990-10-XX-01-05 Vibration Transmitter provides several key benefits:

• Accurate Vibration Monitoring: Converts input signals into precise analog outputs representing real-time vibration levels.

• Versatile Input Compatibility: Works with a variety of vibration sensors including accelerometers, proximity probes, and velocity transducers.

• Adjustable Sensitivity: Allows fine-tuning for different sensor types and machinery requirements.

• Environmental Durability: Enclosure resists dust, moisture, and electrical interference, ensuring stable operation in harsh industrial conditions.

• Easy Integration: Compatible with Bently Nevada monitoring systems and other control platforms.

• Supports Predictive Maintenance: Enables early detection of machinery faults, reducing downtime and maintenance costs.

• Compact and Lightweight: Panel- or wall-mount design simplifies installation without occupying excessive space.

• Reliable Signal Processing: Includes filtering and linearization to provide consistent and accurate output.

• Maintenance-Friendly: Minimal maintenance required due to robust electronics and durable housing.

• Industrial Safety: Supports machine protection systems by providing real-time vibration data for alarms and automated shutdowns.

---

FAQ

1. What types of sensors can this transmitter accept?
   It accepts input from accelerometers, proximity probes, and velocity transducers, providing flexibility in monitoring different machinery types.

2. What is the frequency range of the transmitter?
   The device operates effectively from 0.5 Hz to 10 kHz, covering a broad range of industrial vibration frequencies.

3. Can the output signal be adjusted?
   Yes, the transmitter allows gain adjustment and linearization to match sensor characteristics and application requirements.

4. Is it compatible with Bently Nevada monitoring systems?
   Yes, it is compatible with 3500, 3300 XL, and other vibration monitoring systems.

5. How is the transmitter mounted?
   It can be panel-mounted or wall-mounted using standard mounting hardware for industrial environments.

6. What is the operating temperature range?
   The transmitter is designed to function reliably between -20°C and +70°C.

7. Does it resist industrial contaminants like dust or moisture?
   Yes, the housing is sealed to protect internal electronics from dust, moisture, and other contaminants.

8. What type of output does it provide?
   It delivers an analog voltage or current output proportional to the vibration measured by the connected sensor.

9. Can it handle signals from high-vibration machinery?
   Yes, the transmitter is designed to process signals from both low- and high-amplitude vibration sources.

10. Does it support signal filtering?
    Yes, the transmitter includes internal filtering to reduce noise and provide clean, reliable output signals.

---

Related Models (Same Series or Similar Types)

---

Popular Models from the Same Brand

FAQ

1. What types of sensors can this transmitter accept?
   It accepts input from accelerometers, proximity probes, and velocity transducers, providing flexibility in monitoring different machinery types.

2. What is the frequency range of the transmitter?
   The device operates effectively from 0.5 Hz to 10 kHz, covering a broad range of industrial vibration frequencies.

3. Can the output signal be adjusted?
   Yes, the transmitter allows gain adjustment and linearization to match sensor characteristics and application requirements.

4. Is it compatible with Bently Nevada monitoring systems?
   Yes, it is compatible with 3500, 3300 XL, and other vibration monitoring systems.

5. How is the transmitter mounted?
   It can be panel-mounted or wall-mounted using standard mounting hardware for industrial environments.

6. What is the operating temperature range?
   The transmitter is designed to function reliably between -20°C and +70°C.

7. Does it resist industrial contaminants like dust or moisture?
   Yes, the housing is sealed to protect internal electronics from dust, moisture, and other contaminants.

8. What type of output does it provide?
   It delivers an analog voltage or current output proportional to the vibration measured by the connected sensor.

9. Can it handle signals from high-vibration machinery?
   Yes, the transmitter is designed to process signals from both low- and high-amplitude vibration sources.

10. Does it support signal filtering?
    Yes, the transmitter includes internal filtering to reduce noise and provide clean, reliable output signals.

Related Models (Same Series or Similar Types)

---

Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.