Emerson VE5009 Enhanced System Power Supply

Product Introduction

The Emerson VE5009 is an enhanced system power supply designed to meet the demanding requirements of industrial applications that require reliable, high-performance power. This power supply ensures stable 24V DC output to power various industrial control devices such as PLCs, actuators, and sensors. The VE5009 is optimized for use in environments where power stability, energy efficiency, and advanced protection features are critical.

Built with overvoltage, overcurrent, and short-circuit protection, the VE5009 guarantees safe and reliable power delivery even in the most challenging industrial environments. It provides a high level of efficiency, operating with >90% typical efficiency, reducing energy costs and minimizing heat generation. Its wide input voltage range and DIN rail mounting capabilities allow easy installation in various industrial setups.

Product Parameters

Product Applications

The Emerson VE5009 Enhanced System Power Supply is ideal for a wide range of industrial applications requiring stable, efficient, and reliable power. Some of the key applications include:

• Manufacturing: Powers automation systems, PLCs, sensors, and actuators within automated production environments.

• Energy Generation: Delivers reliable power to control systems, turbines, and other equipment within power plants and energy generation setups.

• Oil and Gas: Ensures consistent power supply to critical systems in offshore rigs, refineries, and pipeline monitoring equipment.

• Chemical Processing: Provides stable power for equipment such as chemical reactors, filtration systems, and distillation columns.

• Water Treatment: Powers control valves, pumps, and monitoring devices in water treatment facilities.

Product Advantages

• High Efficiency: With >90% typical efficiency, the VE5009 minimizes energy consumption, reducing operational costs and improving overall system performance.

• Wide Input Voltage Range: Supports an input voltage range of 85V to 264V AC, making it versatile for use in a wide range of industrial environments with varying power grid standards.

• Advanced Protection Features: Equipped with overvoltage, overcurrent, and short-circuit protection, the VE5009 ensures the safety of both the power supply and connected devices under fault conditions.

• Compact and Reliable: The compact design and DIN rail mounting make the VE5009 easy to install in space-constrained environments while providing reliable performance over a wide temperature range of -20°C to +60°C.

• Rugged Design for Harsh Environments: Designed to withstand the harsh conditions commonly found in industrial environments, including high levels of vibration and extreme temperatures.

• Enhanced Output Capacity: Capable of delivering 10A at 24V DC, the VE5009 is suited for high-power applications, ensuring a stable power supply to demanding systems.

FAQ

1. What is the maximum output current provided by the VE5009?

   • The VE5009 provides a maximum output current of 10A, which is suitable for powering devices with high power demands.

2. What protection mechanisms are built into the VE5009?

   • The VE5009 features built-in overvoltage, overcurrent, and short-circuit protection to ensure the safety of both the power supply and connected systems.

3. Can the VE5009 handle variable input voltage conditions?

   • Yes, the VE5009 supports an input voltage range of 85V to 264V AC, allowing it to operate efficiently in different geographical regions with varying power grid conditions.

4. How does the VE5009 handle power surges and faults?

   • The VE5009 has advanced protection features, including overvoltage and overcurrent protection, to safeguard the power supply and connected devices from electrical surges and faults.

5. What is the efficiency of the VE5009 power supply?

   • The VE5009 offers >90% efficiency, making it an energy-efficient solution that minimizes power loss and reduces operational costs.

6. Is the VE5009 suitable for industrial automation systems?

   • Yes, the VE5009 is ideal for industrial automation systems, providing a reliable and efficient power supply to PLCs, sensors, and control systems.

7. What is the operating temperature range of the VE5009?

   • The VE5009 operates within an operating temperature range of -20°C to +60°C, making it suitable for use in both indoor and outdoor environments.

8. Does the VE5009 have any features to prevent damage to connected devices?

   • Yes, the VE5009 is equipped with overvoltage, overcurrent, and short-circuit protection to prevent damage to connected devices under fault conditions.

9. How is the VE5009 installed?

   • The VE5009 is designed for DIN rail mounting, which allows for easy installation in industrial control panels and cabinets.

10. What makes the VE5009 a reliable choice for industrial power supply?

    • The VE5009’s combination of high efficiency, advanced protection, wide input voltage range, and rugged design make it a highly reliable power supply solution for industrial environments.

Related Models from the Same Series

Popular Models from Emerson

FAQ

1. What is the maximum output current provided by the VE5009?

   • The VE5009 provides a maximum output current of 10A, which is suitable for powering devices with high power demands.

2. What protection mechanisms are built into the VE5009?

   • The VE5009 features built-in overvoltage, overcurrent, and short-circuit protection to ensure the safety of both the power supply and connected systems.

3. Can the VE5009 handle variable input voltage conditions?

   • Yes, the VE5009 supports an input voltage range of 85V to 264V AC, allowing it to operate efficiently in different geographical regions with varying power grid conditions.

4. How does the VE5009 handle power surges and faults?

   • The VE5009 has advanced protection features, including overvoltage and overcurrent protection, to safeguard the power supply and connected devices from electrical surges and faults.

5. What is the efficiency of the VE5009 power supply?

   • The VE5009 offers >90% efficiency, making it an energy-efficient solution that minimizes power loss and reduces operational costs.

6. Is the VE5009 suitable for industrial automation systems?

   • Yes, the VE5009 is ideal for industrial automation systems, providing a reliable and efficient power supply to PLCs, sensors, and control systems.

7. What is the operating temperature range of the VE5009?

   • The VE5009 operates within an operating temperature range of -20°C to +60°C, making it suitable for use in both indoor and outdoor environments.

8. Does the VE5009 have any features to prevent damage to connected devices?

   • Yes, the VE5009 is equipped with overvoltage, overcurrent, and short-circuit protection to prevent damage to connected devices under fault conditions.

9. How is the VE5009 installed?

   • The VE5009 is designed for DIN rail mounting, which allows for easy installation in industrial control panels and cabinets.

10. What makes the VE5009 a reliable choice for industrial power supply?

    • The VE5009’s combination of high efficiency, advanced protection, wide input voltage range, and rugged design make it a highly reliable power supply solution for industrial environments.

Related Models from the Same Series

Popular Models from Emerson

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.