Epro PR6426/00 32mm Eddy Current Sensor

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The EPRO PR6426/00 Eddy Current Sensor is a high-precision, non-contact measurement device designed for industrial machinery condition monitoring. As part of the PR6426 series, this sensor is optimized for tracking shaft displacement, vibration, and position in critical rotating equipment such as turbines, compressors, and generators.

The sensor uses the eddy current principle, generating an electromagnetic field and measuring the change in impedance caused by the proximity of a conductive target. This allows for accurate, real-time measurement without physical contact, reducing wear and ensuring long-term stability. Its rugged stainless-steel housing and advanced electromagnetic shielding enable reliable operation even in harsh industrial environments with high vibration, temperature variations, and electromagnetic interference.

The PR6426/00 sensor is compatible with EPRO CON011 and CON021 transducer drivers and integrates seamlessly with MMS3000 and MMS6000 monitoring systems, providing continuous, high-fidelity vibration and displacement data for predictive maintenance and operational safety.

---

Technical Specifications

---

Product Applications

The PR6426/00 is used in precision condition monitoring for industrial machinery. Its high accuracy and non-contact measurement make it suitable for:

• Steam and Gas Turbines: Monitoring shaft vibration, axial movement, and rotor alignment.

• Compressors and Pumps: Detecting rotor misalignment, imbalance, and early signs of wear.

• Motors and Generators: Continuous monitoring of shaft displacement for operational safety.

• Industrial Fans and Blowers: Detecting excessive vibration and instability in rotating shafts.

• Power Plants: Integrating with predictive maintenance systems for high reliability.

• Petrochemical Facilities: Measuring shaft and rotor motion in high-temperature and high-vibration environments.

---

Product Advantages

The EPRO PR6426/00 Eddy Current Sensor provides several technical benefits:

• High Accuracy: Ensures precise measurement of shaft displacement and vibration.

• Non-contact Operation: Eliminates mechanical wear, ensuring long-term reliability.

• Rugged Construction: Stainless-steel housing resists mechanical stress and environmental extremes.

• Electromagnetic Immunity: Advanced shielding protects against EMI, ensuring stable signals.

• Wide Frequency Response: DC to 10 kHz range enables both static and dynamic measurements.

• Seamless System Integration: Compatible with EPRO CON011/CON021 drivers and MMS systems.

• Stable Signal Output: Maintains consistency under high vibration and temperature changes.

• Compact Design: The 32 mm sensor head balances installation flexibility with durability.

• Low Maintenance: Non-contact measurement reduces operational upkeep.

• Proven Reliability: Widely deployed in critical industrial applications requiring continuous monitoring.

---

FAQ

1. What measurement principle does the PR6426/00 use?
   It uses the eddy current principle, detecting changes in impedance caused by the movement of a conductive target.

2. Which monitoring systems are compatible with this sensor?
   It integrates with EPRO MMS3000, MMS6000, and transducer drivers such as CON011 and CON021.

3. What type of output signal does the sensor provide?
   The sensor delivers a voltage output proportional to the displacement detected.

4. How linear is the PR6426/00 across its measurement range?
   The linearity is maintained within ±1% of the full-scale measurement.

5. Can this sensor operate in high-vibration environments?
   Yes, its robust construction and advanced signal conditioning allow stable operation under high-vibration conditions.

6. Does the sensor require an external power supply?
   No, it receives power through a compatible transducer driver (CON011 or CON021).

7. What is the operating frequency range of this sensor?
   The sensor supports DC to 10 kHz for static and dynamic measurements.

8. How is the sensor typically installed?
   It is installed using threaded mounting to ensure alignment and mechanical stability.

9. How does the PR6426/00 ensure signal stability in electrically noisy environments?
   It features advanced internal electromagnetic shielding and grounding.

10. Is calibration required after installation?
    Factory calibration ensures accuracy, but fine-tuning may be done during system integration for specific applications.

---

Recommended Related Models (Same Series or Similar Types)

---

Popular Models from the Same Brand (EPRO)

FAQ

1. What measurement principle does the PR6426/00 use?
   It uses the eddy current principle, detecting changes in impedance caused by the movement of a conductive target.

2. Which monitoring systems are compatible with this sensor?
   It integrates with EPRO MMS3000, MMS6000, and transducer drivers such as CON011 and CON021.

3. What type of output signal does the sensor provide?
   The sensor delivers a voltage output proportional to the displacement detected.

4. How linear is the PR6426/00 across its measurement range?
   The linearity is maintained within ±1% of the full-scale measurement.

5. Can this sensor operate in high-vibration environments?
   Yes, its robust construction and advanced signal conditioning allow stable operation under high-vibration conditions.

6. Does the sensor require an external power supply?
   No, it receives power through a compatible transducer driver (CON011 or CON021).

7. What is the operating frequency range of this sensor?
   The sensor supports DC to 10 kHz for static and dynamic measurements.

8. How is the sensor typically installed?
   It is installed using threaded mounting to ensure alignment and mechanical stability.

9. How does the PR6426/00 ensure signal stability in electrically noisy environments?
   It features advanced internal electromagnetic shielding and grounding.

10. Is calibration required after installation?
    Factory calibration ensures accuracy, but fine-tuning may be done during system integration for specific applications.

Recommended Related Models (Same Series or Similar Types)

---

Popular Models from the Same Brand (EPRO)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.