Epro PR9670/001-000 Eddy Current Sensor

Company Information
E-mail		[email protected]
Mobile		+8613666033393
Whatsapp		+8613666033393
WeChat		13666033393
Add		Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Product Introduction

The Epro PR9670/001-000 Eddy Current Sensor is a high-performance non-contact displacement and vibration measurement device developed for industrial machinery protection and condition monitoring applications. Based on Epro’s advanced eddy current technology, it provides accurate, reliable, and repeatable measurements of shaft vibration, position, and movement in rotating equipment.

Designed for use in critical systems such as turbines, compressors, and pumps, the PR9670/001-000 delivers exceptional signal stability even under severe operating environments involving high temperature, oil mist, and mechanical vibration. The sensor operates by generating an electromagnetic field that induces eddy currents in a metallic target. The amplitude of these currents varies with the target’s proximity, enabling precise detection of displacement and motion changes.

The PR9670/001-000 represents a balance between precision engineering, robust design, and compatibility with Epro’s comprehensive monitoring platforms such as CON021 proximitor modules and MMS6000 condition monitoring systems. It is widely utilized for both static and dynamic machinery monitoring where accuracy and dependability are essential.

---

Product Parameters

---

Product Applications

The Epro PR9670/001-000 Eddy Current Sensor is a critical sensing component used in various industrial monitoring systems. Its high accuracy, stable operation, and rugged construction make it ideal for use in:

• Steam and Gas Turbines: Measuring shaft displacement, axial movement, and vibration for real-time machinery protection.

• Compressors and Pumps: Monitoring rotor dynamics and shaft position to prevent imbalance or bearing failure.

• Electric Motors and Generators: Tracking rotor movement and eccentricity for improved maintenance planning.

• Gearboxes and Industrial Drives: Ensuring precise shaft alignment and detecting vibration patterns during load transitions.

• Petrochemical and Refinery Equipment: Operating reliably in oil-contaminated and hazardous zones.

• Steel Mills and Heavy Machinery: Measuring critical displacement data in high-vibration and temperature-intensive environments.

The PR9670/001-000 is often integrated with protection systems to trigger alarms or shutdowns when vibration thresholds are exceeded, minimizing equipment downtime and preventing mechanical damage.

---

Product Advantages

The Epro PR9670/001-000 offers a combination of advanced signal stability, durability, and flexibility that sets it apart from standard displacement sensors. Its design optimizes long-term performance under harsh industrial conditions.

• Non-Contact Measurement: Eliminates physical wear and ensures long-term accuracy without mechanical degradation.

• High Signal Accuracy: Provides stable and linear output suitable for both vibration and position measurement.

• Temperature-Compensated Design: Maintains output stability across a wide temperature range.

• Robust Construction: Stainless steel and ceramic elements resist corrosion, mechanical stress, and high pressure.

• Electromagnetic Noise Immunity: Coaxial cable design minimizes interference, ensuring reliable readings even in electrically noisy environments.

• Flexible Installation Options: Available in multiple lengths, thread types, and configurations to match diverse applications.

• IP67 Protection: Ensures reliable performance in oil, dust, and humidity.

• Wide Frequency Response: Capable of capturing both slow and fast dynamic movements in machinery.

• Maintenance-Free Operation: Requires minimal calibration or servicing once installed.

• Seamless System Integration: Fully compatible with Epro monitoring systems for continuous condition tracking.

---

FAQ

1. What measurement principle does the PR9670/001-000 use?
   It operates on the eddy current principle, where a magnetic field induces eddy currents in a metallic target, and the resulting impedance changes are translated into displacement signals.

2. Can the PR9670/001-000 measure both static and dynamic motion?
   Yes, the sensor can simultaneously measure static shaft displacement and dynamic vibration, making it suitable for complex monitoring tasks.

3. What type of output signal does it provide?
   The sensor provides a voltage output proportional to the gap between the probe and the target surface, allowing direct integration into monitoring modules.

4. Is the PR9670/001-000 compatible with the CON021 proximitor module?
   Yes. It is fully compatible with Epro’s CON021 proximitor, ensuring accurate signal conversion and stable monitoring.

5. How does the sensor handle temperature variations?
   The sensor’s components are temperature-compensated to minimize drift, maintaining accuracy across temperatures from -35°C to +180°C.

6. Can this sensor operate in environments with oil contamination or high humidity?
   Yes. The IP67-rated construction provides full protection against oil, dust, and moisture ingress.

7. What kind of materials are suitable targets for this sensor?
   Conductive metals such as steel, aluminum, and copper provide optimal response to eddy current excitation.

8. Is special shielding required for electrical interference protection?
   No. The integrated coaxial cable minimizes interference without requiring additional shielding in most installations.

9. What is the supported frequency range for vibration detection?
   The PR9670/001-000 supports frequencies from DC up to 10 kHz, covering both slow and high-speed machinery dynamics.

10. Can it be used with third-party monitoring systems?
    While optimized for Epro systems, it can also be interfaced with compatible third-party monitoring platforms with proper signal conditioning.

---

Related Models (Same Series or Similar Type)

---

Popular Models from the Same Brand

FAQ

1. What measurement principle does the PR9670/001-000 use?
   It operates on the eddy current principle, where a magnetic field induces eddy currents in a metallic target, and the resulting impedance changes are translated into displacement signals.

2. Can the PR9670/001-000 measure both static and dynamic motion?
   Yes, the sensor can simultaneously measure static shaft displacement and dynamic vibration, making it suitable for complex monitoring tasks.

3. What type of output signal does it provide?
   The sensor provides a voltage output proportional to the gap between the probe and the target surface, allowing direct integration into monitoring modules.

4. Is the PR9670/001-000 compatible with the CON021 proximitor module?
   Yes. It is fully compatible with Epro’s CON021 proximitor, ensuring accurate signal conversion and stable monitoring.

5. How does the sensor handle temperature variations?
   The sensor’s components are temperature-compensated to minimize drift, maintaining accuracy across temperatures from -35°C to +180°C.

6. Can this sensor operate in environments with oil contamination or high humidity?
   Yes. The IP67-rated construction provides full protection against oil, dust, and moisture ingress.

7. What kind of materials are suitable targets for this sensor?
   Conductive metals such as steel, aluminum, and copper provide optimal response to eddy current excitation.

8. Is special shielding required for electrical interference protection?
   No. The integrated coaxial cable minimizes interference without requiring additional shielding in most installations.

9. What is the supported frequency range for vibration detection?
   The PR9670/001-000 supports frequencies from DC up to 10 kHz, covering both slow and high-speed machinery dynamics.

10. Can it be used with third-party monitoring systems?
    While optimized for Epro systems, it can also be interfaced with compatible third-party monitoring platforms with proper signal conditioning.

Related Models (Same Series or Similar Type)

---

Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.