Honeywell FS-SICC-0001/L25 System Interconnection Cable

Product Introduction

The Honeywell FS-SICC-0001/L25 is a factory-terminated, shielded System Interconnection Cable designed for robust signal and power transmission between Honeywell’s Safety Manager, FSC, and Experion PKS components. With a cable length of 25 meters, it is ideal for medium-distance interconnections between controllers, I/O modules, termination panels, and other subsystems within safety and control cabinets.

The cable is constructed with multi-core twisted-pair tinned copper conductors, an overall foil shield, and a durable PVC outer jacket. These attributes enable the FS-SICC-0001/L25 to perform reliably in electrically noisy and mechanically demanding industrial environments. It is typically deployed in Safety Instrumented Systems (SIS) to ensure high-integrity communication and electrical continuity between mission-critical devices.

Engineered to minimize electrical resistance and signal distortion over longer distances, this 25-meter variant offers a balance between flexibility, EMI shielding, and plug-and-play installation. All connectors are pre-installed and tested to Honeywell’s quality standards.

---

Product Specifications

---

Product Applications

The FS-SICC-0001/L25 is tailored for integration in high-reliability industrial automation and safety systems, especially where pre-tested, EMI-protected, and long-distance cabling is essential. Key application domains include:

• Safety Instrumented Systems (SIS)
  Ensures dependable communication between logic solvers, input/output modules, and terminal panels.

• Emergency Shutdown Systems (ESD)
  Supports fault-tolerant connections for high-speed shutdown signal pathways.

• Fire & Gas Systems (F&G)
  Connects distributed flame detectors, smoke sensors, and control logic within certified safety architectures.

• Distributed Control Systems (DCS)
  Serves as the interconnect backbone between Experion PKS control units and I/O blocks.

• Chemical, Oil & Gas Facilities
  Suitable for use in hazardous or high-interference areas requiring secure and shielded wiring.

• Factory Automation Panels
  Supports structured, clean cabinet wiring in manufacturing plants and critical infrastructure.

---

Product Advantages

• Pre-terminated and Fully Tested
  Each cable is assembled, terminated, and electrically tested by Honeywell to ensure zero field termination errors and immediate usability.

• Superior EMI/RFI Shielding
  Full-coverage foil shielding with drain wire provides excellent resistance to electrical noise in high-interference zones.

• Optimized Length for Mid-Range Connections
  At 25 meters, the L25 variant supports both intra-building and inter-rack installations without signal degradation.

• Flexible but Durable Construction
  The cable strikes a balance between mechanical strength and installation flexibility, easing routing through confined panel spaces.

• System-Validated Compatibility
  Certified for use with Safety Manager and FSC subsystems, ensuring zero compatibility risk and consistent system behavior.

• Secure and Safe Operation
  Flame-retardant and oil-resistant jacket materials reduce the risk of fire hazards and environmental damage.

• Simplified Installation & Maintenance
  No special tools or field termination are required; plug and play design accelerates commissioning and reduces system downtime.

• Support for Multi-Signal Channels
  Accommodates power, digital, and analog signal wiring, making it a multipurpose connection solution.

---

FAQ

1. Is the FS-SICC-0001/L25 cable compatible with FSC and Safety Manager systems?
   Yes, the cable is specifically designed for both FSC and Safety Manager platforms.

2. Does this cable support both analog and digital signals?
   Yes, it can transmit low-voltage analog and digital signals with minimal crosstalk and loss.

3. What type of shielding is used in this cable?
   An overall aluminum foil shield with a dedicated drain wire for enhanced EMI/RFI protection.

4. Are the connectors on both ends pre-installed?
   Yes, it comes fully terminated with Honeywell-certified connectors for direct system integration.

5. Can this cable carry redundant signals or power feeds?
   It depends on the wiring layout, but multi-core construction allows for redundancy configurations.

6. What is the recommended bend radius during installation?
   The cable should be bent with a minimum radius of 10 times its outer diameter to avoid stress damage.

7. Is the FS-SICC-0001/L25 suitable for use in hazardous areas?
   Yes, when used within certified enclosures, it is suitable for hazardous or classified zones.

8. Does the cable offer resistance to oil and industrial fluids?
   Yes, the outer jacket is rated for oil resistance and is safe for harsh plant environments.

9. How is signal integrity maintained over 25 meters?
   The cable uses low-resistance copper conductors and EMI shielding to ensure minimal loss and signal distortion.

10. Is this cable hot-swappable?
    No, it is a passive component and must be disconnected from power before installation or removal.

---

Related Models from the Same Series or Functionality

---

Popular Honeywell Modules (Same Brand)

FAQ

1. Is the FS-SICC-0001/L25 cable compatible with FSC and Safety Manager systems?
   Yes, the cable is specifically designed for both FSC and Safety Manager platforms.

2. Does this cable support both analog and digital signals?
   Yes, it can transmit low-voltage analog and digital signals with minimal crosstalk and loss.

3. What type of shielding is used in this cable?
   An overall aluminum foil shield with a dedicated drain wire for enhanced EMI/RFI protection.

4. Are the connectors on both ends pre-installed?
   Yes, it comes fully terminated with Honeywell-certified connectors for direct system integration.

5. Can this cable carry redundant signals or power feeds?
   It depends on the wiring layout, but multi-core construction allows for redundancy configurations.

6. What is the recommended bend radius during installation?
   The cable should be bent with a minimum radius of 10 times its outer diameter to avoid stress damage.

7. Is the FS-SICC-0001/L25 suitable for use in hazardous areas?
   Yes, when used within certified enclosures, it is suitable for hazardous or classified zones.

8. Does the cable offer resistance to oil and industrial fluids?
   Yes, the outer jacket is rated for oil resistance and is safe for harsh plant environments.

9. How is signal integrity maintained over 25 meters?
   The cable uses low-resistance copper conductors and EMI shielding to ensure minimal loss and signal distortion.

10. Is this cable hot-swappable?
    No, it is a passive component and must be disconnected from power before installation or removal.

Related Models from the Same Series or Functionality

---

Popular Honeywell Modules (Same Brand)

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.