Ovation 1C31123G01 Digital Output Module

Product Introduction

The Ovation 1C31123G01 Digital Output Module is an industrial-grade output interface designed for Emerson’s Ovation Distributed Control System (DCS). It provides reliable, high-speed switching of digital signals to control field devices such as solenoids, relays, alarms, and actuators. With advanced electronic protection, galvanic isolation, and redundant design options, this module ensures precise and safe operation in power generation, process automation, and critical infrastructure applications.

Product Specifications

Applications

• Power Generation: Drives alarms, interlocks, and valve controls in turbine and boiler systems.

• Process Automation: Interfaces with pumps, solenoids, and pneumatic actuators in chemical or water treatment plants.

• Industrial Manufacturing: Controls conveyors, motor starters, and safety interlocks in production lines.

• Oil & Gas Facilities: Manages remote relays, pipeline valves, and emergency shutdown systems.

• Transportation Systems: Provides digital control for signaling and track-switching equipment.

• Utility Monitoring: Enables output control for distributed sensors and grid management equipment.

Advantages

• High-Speed Switching: Sub-millisecond output response for precise control of critical processes.

• Galvanic Isolation: Protects both the field equipment and control system from electrical surges or ground loops.

• Advanced Diagnostics: Built-in fault detection provides quick troubleshooting and maintenance.

• Robust Construction: Designed for harsh industrial environments with wide temperature and humidity tolerance.

• Scalable Architecture: Seamlessly integrates into Ovation DCS racks with hot-swappable convenience.

• Enhanced Reliability: Redundant design capability ensures uninterrupted operation during maintenance or component failure.

• Energy Efficiency: Low power consumption reduces overall system operating costs.

FAQ

1. What is the output voltage range supported by the 1C31123G01 module?
   It provides 24 VDC nominal outputs suitable for most industrial digital control applications.

2. How many independent digital output channels are available on this module?
   The module includes 16 isolated digital output channels.

3. What is the maximum continuous current each output channel can handle?
   Each channel can safely source or sink up to 0.5 A without degradation.

4. Does the module provide isolation between field outputs and the control bus?
   Yes, it features 1500 V RMS isolation to protect the DCS backplane and connected devices.

5. What is the typical output switching time of the module?
   It achieves response times of less than 1 millisecond for fast process control.

6. What built-in diagnostic features are available for fault detection?
   The module includes per-channel short-circuit detection and comprehensive status reporting.

7. What environmental operating conditions can the module tolerate?
   It operates reliably between –20 °C and +60 °C with up to 95% non-condensing humidity.

8. How is the module powered within the Ovation DCS rack?
   It uses the standard 24 VDC power supply provided by the Ovation I/O backplane.

9. Can the module be replaced or serviced while the system is live?
   Yes, it is hot-swappable, allowing removal or replacement without shutting down the system.

10. Is the module certified for use in international industrial installations?
    It is fully CE, UL, and CSA certified, meeting global industrial control safety standards.

Recommended Related Models (Same Series or Similar)

Popular Ovation Models

FAQ

1. What is the output voltage range supported by the 1C31123G01 module?
   It provides 24 VDC nominal outputs suitable for most industrial digital control applications.

2. How many independent digital output channels are available on this module?
   The module includes 16 isolated digital output channels.

3. What is the maximum continuous current each output channel can handle?
   Each channel can safely source or sink up to 0.5 A without degradation.

4. Does the module provide isolation between field outputs and the control bus?
   Yes, it features 1500 V RMS isolation to protect the DCS backplane and connected devices.

5. What is the typical output switching time of the module?
   It achieves response times of less than 1 millisecond for fast process control.

6. What built-in diagnostic features are available for fault detection?
   The module includes per-channel short-circuit detection and comprehensive status reporting.

7. What environmental operating conditions can the module tolerate?
   It operates reliably between –20 °C and +60 °C with up to 95% non-condensing humidity.

8. How is the module powered within the Ovation DCS rack?
   It uses the standard 24 VDC power supply provided by the Ovation I/O backplane.

9. Can the module be replaced or serviced while the system is live?
   Yes, it is hot-swappable, allowing removal or replacement without shutting down the system.

10. Is the module certified for use in international industrial installations?
    It is fully CE, UL, and CSA certified, meeting global industrial control safety standards.

Recommended Related Models (Same Series or Similar)

Popular Ovation Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.