Bently Nevada 330103-04-08-10-02-00 3300 XL 8 mm Proximity Probe

Product Introduction

The Bently Nevada 330103-04-08-10-02-00 is an 8 mm 3300 XL Proximity Probe, designed for highly accurate, reliable machinery monitoring in industrial environments. This proximity probe is part of the 3300 XL series, widely recognized for its exceptional performance in detecting shaft displacement, vibration, and position. The probe converts the relative motion of a target into a precise electrical signal, enabling condition monitoring systems to track equipment health, detect misalignments, and prevent unexpected failures.

---

Technical Specifications

---

Applications

• Continuous machinery condition monitoring

• Shaft vibration and displacement detection

• Turbo-machinery monitoring (turbines, compressors, pumps)

• Rotating equipment health monitoring

• Preventive and predictive maintenance systems

• Power generation plants and heavy industrial equipment monitoring

---

Advantages

• High Accuracy: Provides precise measurement of shaft displacement and vibration.

• Reliability: Designed to operate in harsh industrial environments with extreme temperatures and high vibration.

• Compatibility: Fully compatible with 3300 XL monitoring systems and standard industry interfaces.

• Durable Construction: Stainless steel housing and rugged cabling ensure long-term performance.

• Wide Measurement Range: Capable of detecting both small and large shaft displacements.

• Quick Installation: Standardized connector and mounting options simplify integration into existing systems.

---

FAQ

Q1: What is the maximum operating temperature for this probe?
A1: The probe operates safely from -40°C to +121°C (-40°F to +250°F).

Q2: Can this probe be used with any 3300 XL system?
A2: Yes, it is compatible with all standard 3300 XL proximity monitoring systems.

Q3: What is the output signal type?
A3: The probe provides an AC differential voltage output proportional to shaft displacement.

Q4: What is the probe’s measurement range?
A4: Typically, the measurement range is 0–2 mm depending on target and system configuration.

Q5: Is the probe suitable for high-vibration environments?
A5: Yes, it is specifically designed for high-vibration industrial applications.

Q6: What type of cable does the probe use?
A6: The probe uses a shielded coaxial cable to reduce electromagnetic interference.

Q7: Can this probe detect both axial and radial shaft movement?
A7: It primarily detects radial displacement; axial movement requires specific installation configuration.

Q8: What is the frequency response of the probe?
A8: The typical frequency response is DC to 10 kHz.

Q9: Is the probe resistant to moisture and dust?
A9: The probe housing provides environmental protection up to IP65/IP67 depending on installation.

Q10: Can this probe be replaced without shutting down the system?
A10: Replacement requires proper system procedures, typically involving a short maintenance window to ensure safety.

---

Recommended 6 Same-Series or Related Models

---

6 Popular Models from the Same Brand

Recommended 6 Same-Series or Related Models

---

6 Popular Models from the Same Brand

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.