Bently Nevada 330701-00-10-10-11-05 3300 XL 11 mm Proximity Probe

Product Introduction

The Bently Nevada 330701-00-10-10-11-05 3300 XL 11 mm Proximity Probe is a high-precision displacement sensor designed for monitoring the relative position of rotating machinery components. It provides accurate, non-contact measurement of shaft movement, enabling early detection of misalignment, imbalance, and bearing wear. With a compact 11 mm probe tip, this model allows for installation in tight spaces while maintaining consistent measurement performance. The probe is compatible with the 3300 XL monitoring system and is engineered for high reliability in industrial environments, supporting predictive maintenance and condition monitoring programs.

Product Specifications

Applications

• Rotating Machinery Monitoring: Measures shaft displacement in turbines, compressors, and motors.

• Bearing Analysis: Detects bearing wear, clearance changes, and alignment issues.

• Vibration Monitoring: Supports vibration analysis for predictive maintenance.

• Industrial Generators: Measures rotor motion to prevent mechanical failures.

• Petrochemical and Power Plants: Provides critical measurement in high-speed and high-load machinery.

Advantages

• High Precision: Provides accurate non-contact displacement measurement for early fault detection.

• Compact Design: 11 mm probe tip allows installation in tight or restricted spaces.

• Wide Frequency Response: Captures both low and high-frequency shaft movements.

• Robust Construction: Stainless steel housing ensures durability in harsh industrial environments.

• Reliable Integration: Fully compatible with 3300 XL Proximitor monitoring systems.

Frequently Asked Questions (FAQ)

1. What is the measurement range of this probe?
   The probe measures 0–2 mm (0–80 mils) of shaft displacement, suitable for most industrial machinery.

2. What is the output compatibility?
   It is compatible with all 3300 XL Proximitor sensors and monitoring modules.

3. What type of mounting thread does it use?
   It supports M8 or 1/4-28 UNF mounting threads, providing flexibility in installation.

4. Is the probe suitable for high-frequency measurements?
   Yes, its frequency response extends up to 10 kHz, capturing rapid shaft movements.

5. What is the probe tip material?
   The tip is made of hardened stainless steel, resistant to wear and mechanical stress.

6. Can it be used for predictive maintenance?
   Yes, it provides precise displacement data for early detection of misalignment, imbalance, and bearing wear.

7. What is the diameter and weight of the probe?
   Diameter is 11 mm, and the weight is 0.07 kg, allowing for compact installations.

8. Does the probe require calibration before installation?
   Standard factory calibration is sufficient; no additional on-site calibration is typically needed.

9. Can this probe operate in electrically noisy environments?
   Yes, the probe’s design and shielding minimize susceptibility to electromagnetic interference.

10. Is the probe compatible with all 3300 XL Proximity systems?
    Yes, it is fully compatible and optimized for 3300 XL monitoring modules.

Related Models in the Same Series

Popular Bently Nevada Models

Frequently Asked Questions (FAQ)

1. What is the measurement range of this probe?
   The probe measures 0–2 mm (0–80 mils) of shaft displacement, suitable for most industrial machinery.

2. What is the output compatibility?
   It is compatible with all 3300 XL Proximitor sensors and monitoring modules.

3. What type of mounting thread does it use?
   It supports M8 or 1/4-28 UNF mounting threads, providing flexibility in installation.

4. Is the probe suitable for high-frequency measurements?
   Yes, its frequency response extends up to 10 kHz, capturing rapid shaft movements.

5. What is the probe tip material?
   The tip is made of hardened stainless steel, resistant to wear and mechanical stress.

6. Can it be used for predictive maintenance?
   Yes, it provides precise displacement data for early detection of misalignment, imbalance, and bearing wear.

7. What is the diameter and weight of the probe?
   Diameter is 11 mm, and the weight is 0.07 kg, allowing for compact installations.

8. Does the probe require calibration before installation?
   Standard factory calibration is sufficient; no additional on-site calibration is typically needed.

9. Can this probe operate in electrically noisy environments?
   Yes, the probe’s design and shielding minimize susceptibility to electromagnetic interference.

10. Is the probe compatible with all 3300 XL Proximity systems?
    Yes, it is fully compatible and optimized for 3300 XL monitoring modules.

Related Models in the Same Series

Popular Bently Nevada Models

Excellent PLC Co., Ltd. has a large number of brand new and original PLC and DCS spare parts, with more than 60 cooperative countries. All products are guaranteed for 1 year and delivered to you by high-quality express. We are committed to using the best products and the most favorable prices to meet the needs and friendship of our customers. We have won the trust of thousands of customers, including these excellent customers.

As for the delivery time, when we receive your order requirements, we will arrange for warehouse personnel to test and verify the products. After you place the order, we will send it to you within 24 hours.