Tel: +8613666033393 E-mail: [email protected]

About | Contact

“The Engine Is Fine, So Why Does the Pressure Look Wrong?” — A Support Call About the 165855 Sensor

Blog Excellent PLC

Home

Blog Excellent PLC

“The Engine Is Fine, So Why Does the Pressure Look Wrong?” — A Support Call About the 165855 Sensor

2026-01-26 Troubleshooting

“The Engine Is Fine, So Why Does the Pressure Look Wrong?” — A Support Call About the 165855 Sensor Notes from a Technical Support Engineer Customer:“We’re seeing lo……

Read more
Why Cylinder Pressure Saturation Should Be a Serious Concern: A Case with Bently Nevada 165855-12-01

2026-01-26 Troubleshooting

By Natalie Lee – Vibration and Condition Monitoring Specialist I’ve worked with Bently Nevada 165855-12-01 cylinder pressure sensors for years, but I’ll be honest, this one took……

Read more
The Silent Killer: How Over-Torquing the Cylinder Pressure Sensor Messed Up Our Data

2026-01-26 Troubleshooting

By Jack Pearson – Field Commissioning Engineer It wasn’t a failure, but it might as well have been. The Bently Nevada 165855-12-01 cylinder pressure sensor was perfectly functional &m……

Read more
When Cylinder Pressure Data Slowly Loses Its Truth – A Field Case with Bently 165855-12-01

2026-01-26 Troubleshooting

By Kevin Marshall – Combustion System Specialist Cylinder pressure sensors rarely fail in dramatic ways. Most of the time, they don’t die — they slowly drift away from reality. ……

Read more
Intermittent Signal & Electrical Noise Troubleshooting Guide for Eddy Current Probes

2026-01-26 Troubleshooting

Executive Summary This technical bulletin addresses intermittent signal loss and electrical noise affecting eddy current proximity probe systems, specifically impacting continuous machinery monito……

Read more
Signal Saturation – The “Pegged” Maximum Reading in Bently 3300 Systems

2026-01-26 Troubleshooting

Hey everyone, Mark here from the field. Today we’re tackling a classic alarm that’ll get any reliability engineer’s attention: your vibration or displacement channel is pinn……

Read more
Signal Failure – Sudden Drop to Zero in Bently 3300 Ceramic Probe (164517-050-10-01-RU)

2026-01-26 Troubleshooting

Hey everyone, Tech Talk with Mark here. Today, we’re diving deep into a classic and frustrating problem that can stop any rotating machinery engineer in their tracks: your Bently Nevada……

Read more
Three Summers, One Probe, and a Slow Loss of Sensitivity

2026-01-23 Troubleshooting

Posted by Alan Brooks – Machinery Diagnostics Contractor The probe didn’t fail in a day.It didn’t even fail in a year. That’s why nobody noticed. The Bently Nevada 164517-……

Read more
A New Probe in an Old System: Lessons from a Bently 164517 Ceramic Tip Installation

2026-01-23 Troubleshooting

By Eric Lawson – Commissioning Engineer This was one of those jobs where nothing was technically “wrong,” but everything felt off. We replaced a proximity probe on a legacy rack……

Read more
When the Machine Didn’t Change, but the Reading Did: A Lesson from a 3300 Ceramic Probe

2026-01-23 Troubleshooting

By Robert Hayes – Rotating Equipment Specialist (30+ Years in the Field) I’ve learned the hard way that proximity probes don’t lie—but they also don’t explain themse……

Read more
Humidity-Induced Signal Instability in Bently Nevada 164517-025-10-02-00 Proximity Probes

2026-01-23 Troubleshooting

By Laura Bennett – Asset Reliability Consultant Environmental conditions rarely get the attention they deserve in vibration monitoring systems. A recent assessment involving the Bently Neva……

Read more
Field Notes: Intermittent Signal Jumps on a 3300 Ceramic Tip Probe

2026-01-23 Troubleshooting

Written by Jason Moore – Field Service Engineer, Rotating Machinery This one took longer than it should have, mostly because nothing failed in a clean, obvious way. The machine was fine. Th……

Read more

<<<···66 676869 70 ··· >

[email protected]

Leave a message